Cluster 2
Jump to navigation
Jump to search
Introduction
Cluster 2 is the most modern cluster the Irwin Lab maintains. It is reaching End of Life but that is TBD.
(Edited in May 06,2024)
Priorities and Policies
- Lab Security Policy
- Disk space policy
- Backups policy.
- Portal system for off-site ssh cluster access.
- Get a Cluster 2 account and get started
Special machines
Normally, you will just ssh to sgehead aka gimel from portal.ucsf.bkslab.org where you can do almost anything, including job management. A few things require licensing and must be done on special machines.
hypervisor 'he' hosts:
- alpha - which is critical and runs foreman, DNS, DHCP, and other important services
- beta - with runs LDAP authentication
- epsilon - portal.ucsf.bkslab.org - cluster gateway from public internet
- gamma - sun grid engine qmaster
- phi - mysqld/excipients
- psi for using the PG fortran compiler
- ppilot is at http://zeta:9944/ - you must be on the Cluster 2 private network to use it
- Tau is the web server for ZINC,
- no other specia
- zeta - Psicquic/pipeline pilot
- Sigma can definitely go off and stay off. It was planned for a fingerprinting server, never done.
hypervisor 'aleph2' hosts:
- alpha7 - This is to be the future architecture VM of the cluster (DNS/DHCP/Puppet/Foreman/Ansible). CentOS7.
- kappa is licensing. ask me. ("i have no clue what this licenses. Turned off." - ben)
- rho contains this wiki and also bkslab.org
Notes
- to get from SVN, use svn ssh+svn
Hardware and physical location
- 1856 cpu-cores for queued jobs
- 128 cpu-cores for infrastructure, databases, management and ad hoc jobs.
- 788 TB of high quality NFS-available disk
- Our policy is to have 4 GB RAM per cpu-core unless otherwise specified.
- Machines older than 3 years may have 2GB/core and 6 years old have 1GB/core.
- Cluster 2 is currently stored entirely in Rack 0 which is in Row 0, Position 4 of BH101 at 1700 4th St (Byers Hall).
- Central services are on he,aleph2,and bet
- CPU
- 3 Silicon Mechanics Rackform nServ A4412.v4 s, each comprising 4 computers of 32 cpu-cores for a total of 384 cpu-cores.
- 1 Dell C6145 with 128 cores.
- An HP DL165G7 (24-way) is sgehead
- more computers to come from Cluster 0, when Cluster 2 is fully ready.
- DISK
- HP disks - 40 TB RAID6 SAS (new in 2014)
- Silicon Mechanics NAS - new in 2014 - 77 TB RAID6 SAS (new in 2014)
- A HP DL160G5 and an MSA60 with 12 TB SAS (disks new in 2014)
= Naming convention
- The Hebrew alphabet is used for physical machines
- Greek letters for VMs.
- Functions (e.g. sgehead) are aliases (CNAMEs).
- compbio.ucsf.edu and ucsf.bkslab.org domains both supported.
Disk organization
- shin aka nas1 mounted as /nfs/db/ = 72 TB SAS RAID6. NOTE: ON BAND: $ sudo /usr/local/RAID\ Web\ Console\ 2/startupui.sh to interact with raid controller. username: raid. pw: c2 pass
- bet aka happy, internal: /nfs/store and psql (temp) as 10 TB SATA RAID10
- elated on happy: /nfs/work only as 36 TB SAS RAID6
- dalet exports /nfs/home & /nfs/home2
Special purpose machines - all .ucsf.bkslab.org
- sgehead aka gimel.cluster - nearly the only machine you'll need.
- psi.cluster - PG fortran compiler (if it only has a .cluster address means it has no public address)
- portal aka epsilon - secure access
- zeta.cluster - Pipeline Pilot
- shin, bet, and dalet are the three NFS servers. You should not need to log in to them.
on teague desktop, /usr/local/RAID Web Console 2/startupui.sh connect to shin on public network raid / C2 on shin
- mysql1.cluster - general purpose mysql server (like former scratch)
- pg1.cluster - general purpose postgres server
- fprint.cluster - fingerprinting server
Table of Server Information
SLURM
Server Name | Operating System | Functions |
---|---|---|
epyc | Rocky 8 | Apache/HTTPD Webserver + Proxy |
epyc2 | Rocky 8 | Hosts Vital VMs for cluster 2 for function. |
epyc-A40 | Rocky 8 | |
n-1-101 | Centos 7 | |
n-1-105 | Centos 7 | |
n-1-124 | Centos 7 | |
n-1-126 | Centos 7 | |
n-1-141 | Centos 7 | |
n-1-16 | Centos 7 | |
n-1-17 | Centos 7 | |
n-1-18 | Centos 7 | |
n-1-19 | Centos 7 | |
n-1-20 | Centos 7 | |
n-1-21 | Centos 7 | |
n-1-28 | Centos 7 | |
n-1-38 | Centos 7 | |
n-5-13 | Centos 7 | |
n-5-14 | Centos 7 | |
n-5-15 | Centos 7 | |
n-5-32 | Centos 7 | |
n-5-33 | Centos 7 | |
n-5-34 | Centos 7 | |
n-5-35 | Centos 7 | |
n-9-19 | Centos 7 | |
n-9-20 | Centos 7 | |
n-9-21 | Centos 7 | |
n-9-22 | Centos 7 | |
n-9-34 | Centos 7 | |
n-9-36 | Centos 7 | |
n-9-38 | Centos 7 |
SGE
Server Name | Operating System | Functions |
---|---|---|
gimel | Centos 6 | In-person Login Node |
Centos 6 | Hosts Vital VMs for cluster 2 for function. | |
het | Centos 6 | |
n-0-129 | Centos 6 | |
n-0-136 | Centos 6 | |
n-0-139 | Centos 6 | |
n-0-30 | Centos 6 | |
n-0-37 | Centos 6 | |
n-0-39 | Centos 6 | |
n-8-27 | Centos 6 | |
n-9-23 | Centos 6 |