Configure new disk: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 77: | Line 77: | ||
[[Category: | [[Category:Sysadmin]] |
Latest revision as of 20:16, 14 February 2014
Configure new disk
High level description
- 0.1) remove the disk in the db array as a spare from the system array (this was a workaround for something strange)
- 0.2) assign the spare disk in the work array as a spare
- 1) create new raid 1+0 arrays for each chassis then assign slot 25 as a spare
- 2) assign each to a physical volume
- 3) create a volume group for each
- 4) create a logical volume for each
- 5) create a file system on the logical volume
- 6) Add to fstab & mount
- 7) Add to nfs exports and restart nfsd
Steps 0.1 though 1 are done using the HP controller proprietary software. the rest are done as root on the command line
Note
- 1) there is a spare assigned to array A
- 2) everything is working off of the controller in "slot 1" (the good one)
- 3) the dell box does not know how to distinguish drives (the IDs are all the same)
- 4) we have lots of spares
Command line description
As root on fawlty:
/opt/compaq/hpacucli/bld/hpacucli
then inspect the current configuration:
ctrl all show config
To remove the spare let's just remove all spares (we haven't assigned any important ones yet) run the following command:
ctrl slot=1 array A remove spares=all
create arrays (logical disk with all the disks in a specific chassis)
ctrl slot=1 create type=ld drives=1E:1:1-1E:1:24 raid=1+0 ctrl slot=1 create type=ld drives=4E:1:1-4E:1:24 raid=1+0
(for the second array)
add spares
ctrl slot=1 array A add spares=3E:1:25 ctrl slot=1 array D add spares=1E:1:25 ctrl slot=1 array E add spares=3E:1:25
create physical volume
pvcreate /dev/sdd pvcreate /dev/sde
create volume group
vgcreate nfs_store_vg /dev/sde vgcreate nfs_db_vg /dev/sdd
create logical volume
lvcreate -n nfs_db_lv -l 100%FREE nfs_db_vg lvcreate -n nfs_store_lv -l 100%FREE nfs_store_vg
create file system on logical volume
mkfs.xfs -L nfs_db /dev/mapper/nfs_db_vg-nfs_db_lv mkfs.xfs -L nfs_store /dev/mapper/nfs_store_vg-nfs_store_lv
add fstab and mount
LABEL=nfs_db /nfs/db xfs rw,noatime,quota 0 0 LABEL=nfs_store /nfs/store xfs rw,noatime,quota 0 0
then
mkdir -pv /nfs/db mkdir -pv /nfs/store mount -at xfs
nfsexports, restart nfsd
/nfs/db 10.10.0.0/16(rw,sync,fsid=1002) 142.150.84.128/27(rw,sync,fsid=1002) /nfs/store 10.10.0.0/16(rw,sync,fsid=1003) 142.150.84.128/27(rw,sync,fsid=1003)
then
service nfs reload
mount everywhere
instructions here