How to Get Minicom to Work on a Mac

Revision as of 17:59, 30 June 2016 by Benrwong (talk | contribs) (Created page based on "HOW TO GET MINICOM TO WORK ON A MAC")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

My mac is running Snow Leopard, OSX 10.6 First install the following three drivers:

Then reboot your computer. Your computer should now detect the device using a serial to usb adapter (ls /dev). It should be something like cu.usbserial and/or tty.usbserial. Take note of the device name starting with a “cu”, so in my case I would take note of “cu.usbserial”. Then download minicom here: Once installed run minicom like this:

/opt/minicom/current/bin/minicom -s

You’ll see a screen that looks like this: Arrow down and select “Serial port setup” Enter the Serial Device and change the “E” setting to “9600 8N1”. Your screen should look something like this:

Then arrow down to exit.