Difference between revisions of "How to Create Cluster 7 (Ubuntu 20.04)"

From DISI
Jump to navigation Jump to search
Line 19: Line 19:
 
A NAT machine will act as a local VPN to the cluster. This will be the first machine you SSH into.
 
A NAT machine will act as a local VPN to the cluster. This will be the first machine you SSH into.
  
Here are the instructions:
+
Current machine:
 +
* Hostname: segundo.dot
 +
* IP Address: 10.70.1.2
 +
 
 +
=== Instructions ===
 
# Install Ubuntu 20.04 using USB. You can set everything to default but make sure to disable network interfaces if DHCP Server is not set up yet.
 
# Install Ubuntu 20.04 using USB. You can set everything to default but make sure to disable network interfaces if DHCP Server is not set up yet.
# After OS installation, grab MAC Address of network interface enp4s0
+
# After OS installation, grab MAC Address of network interface enp4s0. You'll need it to make a public IP.
 
#* ip a
 
#* ip a
 
# Create a DNS entry for this machine in the website below to give you a public IP address
 
# Create a DNS entry for this machine in the website below to give you a public IP address
 
#* https://www.cgl.ucsf.edu/cgi-bin/secure/dns_dhcp_registration.py?action=view_zone&name=compbio.ucsf.edu
 
#* https://www.cgl.ucsf.edu/cgi-bin/secure/dns_dhcp_registration.py?action=view_zone&name=compbio.ucsf.edu
 +
# File a ticket to UCSF IT to open port 22 for the NAT machine
 
# Configure private and public network interfaces
 
# Configure private and public network interfaces
 
#* vim /etc/netplan/00-installer-config.yaml
 
#* vim /etc/netplan/00-installer-config.yaml

Revision as of 20:35, 20 October 2021

Introduction

Here are the instructions on how to build Cluster 7 using Ubuntu 20.04.

The build is not complete as of October 19, 2021.

Hardware Requirements (so far)

  • 2 x 1 gigabit unmanaged switches
  • one switch for private IP
  • one switch for public IP
  • 4 x unused ProLiant DL160 G5 Machines
  • one for NAT machine
  • one for Foreman Server
  • one for LDAP Server
  • one extra for any testing
  • 1 x USB for Operating System (OS)


Create a Network Address Translation(NAT) machine

A NAT machine will act as a local VPN to the cluster. This will be the first machine you SSH into.

Current machine:

  • Hostname: segundo.dot
  • IP Address: 10.70.1.2

Instructions

  1. Install Ubuntu 20.04 using USB. You can set everything to default but make sure to disable network interfaces if DHCP Server is not set up yet.
  2. After OS installation, grab MAC Address of network interface enp4s0. You'll need it to make a public IP.
    • ip a
  3. Create a DNS entry for this machine in the website below to give you a public IP address
  4. File a ticket to UCSF IT to open port 22 for the NAT machine
  5. Configure private and public network interfaces
    • vim /etc/netplan/00-installer-config.yaml
    • Configuration should look like this:
    # This is the network config written by 'subiquity'
    network:
    ethernets:
    enp3s0:
    addresses:
    - 10.70.1.2/16
    gateway4: 127.0.0.1
    nameservers:
    addresses:
    - 10.70.1.1
    search:
    - dot
    enp4s0:
    addresses:
    - 169.230.26.58/16
    gateway4: 169.230.26.1
    nameservers:
    addresses:
    - 8.8.8.8
    - 8.8.4.4
    - 128.218.254.10
    - 128.218.254.40
    search:
    - dot
    - compbio.ucsf.edu
    version: 2
  6. Test if configuration works by pinging google
    • ping google.com

Install Foreman