Generating decoys (Reed's way): Difference between revisions

From DISI
Jump to navigation Jump to search
No edit summary
(27 intermediate revisions by 2 users not shown)
Line 4: Line 4:


updated 8/15/2019
updated 8/15/2019
updated 3/6/2020
updated 5/18/2020


This pipeline will generate property-matched decoys for a set of ligand SMILES. To build ligands yourself, see "ligand prep" in:
This pipeline will generate property-matched decoys for a set of ligand SMILES. To build ligands yourself, see "ligand prep" in:
Line 17: Line 21:
   source /nfs/soft/jchem/current/env.csh
   source /nfs/soft/jchem/current/env.csh


 
If the below script still not run:
  source /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk/env.csh
== Querying ZINC for Protomers ==
== Querying ZINC for Protomers ==


This procedure is advised if you want decoys to be charge-matched to ligands.
This procedure generates decoys for your input ligands by searching through 3D conformers that are already built in ZINC. This procedure is advised if you want decoys to be charge-matched to ligands.


=== Step 1) Setting up directories for Protomers ===
=== Step 1) Setting up directories for Protomers ===


Before starting, you need a SMILES file with the format (SMILES first, ID second):
Before starting, you need a SMILES file with the format (SMILES first, <B>unique</B> ID second):
   S(Nc1c(O)cc(C(=O)O)cc1)(c2c(scc2)C(=O)O)(=O)=O 116
   S(Nc1c(O)cc(C(=O)O)cc1)(c2c(scc2)C(=O)O)(=O)=O 116


Line 30: Line 35:
      
      
     PROTONATE YES
     PROTONATE YES
     MWT 20 125
     MWT 0 125
     LOGP 0.4 3.6
     LOGP 0 3.6
     RB 1 5
     RB 0 5
     HBA 0 4
     HBA 0 4
     HBD 0 3
     HBD 0 3
     CHARGE 0 2
     CHARGE 0 2
    LIGAND TC RANGE 0.0 0.35
     MINIMUM DECOYS PER LIGAND 20
     MINIMUM DECOYS PER LIGAND 20
     DECOYS PER LIGAND 50
     DECOYS PER LIGAND 50
Line 42: Line 48:




If your SMILES file is already protonated as you want it, set "PROTONATE NO".  
If your input ligand SMILES file is already protonated as you want it, set "PROTONATE NO".
 
If you want your input ligand SMILES protonated, only protomer SMILES with unique properties will be kept for generating decoys. Therefore, if you have one ligand that exists in 4 tautomers, all of which have identical molecular weight, cLogP, # rotatable bonds, # H-bond acceptors and donors, and net charge, only <B>one</B> will be maintained for decoy matching. This doesn't apply if you set "PROTONATE NO".


This file specifies that for each ligand protomer, at least 20 decoys will be retrieved with the following properties:
This file specifies that for each ligand protomer, at least 20 decoys will be retrieved with the following properties:
     - within 125 Daltons
     - within +/- 125 Daltons
     - within 3.6 logP
     - within +/- 3.6 logP
     - within 5 rotatable bonds
     - within +/- 5 rotatable bonds
     - within 4 hydrogen bond acceptors
     - within +/- 4 hydrogen bond acceptors
     - within 3 hydrogen bond donors
     - within +/- 3 hydrogen bond donors
     - within +/- 2 charge
     - within +/- 2 charge
     - 0.35 or less Tanimoto
     - 0.35 or less Tanimoto
Line 57: Line 65:
     - "TANIMOTO" refers to whether a Tanimoto calculation should be performed - see step 3 for when this is necessary
     - "TANIMOTO" refers to whether a Tanimoto calculation should be performed - see step 3 for when this is necessary


These are the default values, but you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.  
These are <B>arbitrary</B>, and you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.  


Once you have created this file, run the following command to create the decoy generation directory:
Once you have created this file, run the following command to create the decoy generation directory:
Line 84: Line 92:


If you don't get enough decoys, the "decoy_generation.in" file can be modified by changing "MAXIMUM TC BETWEEN DECOYS", "MINIMUM DECOYS PER LIGAND", etc.
If you don't get enough decoys, the "decoy_generation.in" file can be modified by changing "MAXIMUM TC BETWEEN DECOYS", "MINIMUM DECOYS PER LIGAND", etc.
To not run the time-consuming Tanimoto calculation between all ligands and decoys again, simply add/change this in the "decoy_generation.in" file:
To not run the time-consuming Tanimoto calculation between all decoys again, simply add/change this in the "decoy_generation.in" file:


     TANIMOTO NO
     TANIMOTO NO
Line 91: Line 99:


     "test_ligdecoy_smiles.smi"
     "test_ligdecoy_smiles.smi"
     "Tc_matrix"
     "cluster_head.list"
    "Max_Tc_col"


Otherwise, this step will not run.
Otherwise, this step will not run.
Line 98: Line 105:
If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.
If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.


If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.  
If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. These files have the format "SMILES", "ZINC ID", "logP", "#Rotatable Bonds", "# Hydrogen Bond Donors", "# Hydrogen Bond Acceptors", "Charge", "Protomer SMILES", and "Tanimoto Coefficient to Ligand".
 
There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.  


If you still cannot get enough decoys for your ligands, consider reducing the number of ligands you have by clustering, for example, or using the SMILES decoy generation below, which is not limited to only molecules that are already built in ZINC15.
If you still cannot get enough decoys for your ligands, consider reducing the number of ligands you have by clustering, for example, or using the SMILES decoy generation below, which is not limited to only molecules that are already built in ZINC15.
Line 112: Line 121:
     "decoys" - this will include the decoy .db2.gz files for docking and "decoys.smi" which contains all the SMILES strings for property matched decoys
     "decoys" - this will include the decoy .db2.gz files for docking and "decoys.smi" which contains all the SMILES strings for property matched decoys


IMPORTANT: It is possible that there were not 50 property-matched decoys for all of your ligand protomers. The "ligands.smi" file in {COPY_TO_DIR} will not include these. Make  
IMPORTANT: It is possible that all of your ligand protomers were not matched to property-matched decoys. The "ligands.smi" file in {COPY_TO_DIR} will not include these. Make  
sure you do not dock these if you calculate enrichment values.
sure you do not dock these if you calculate enrichment values.


== Querying ZINC for SMILES ==
== Querying ZINC for SMILES ==


If you would like to query ZINC for decoy SMILES so that you can build decoys yourself or if your ligands are >400 Da, continue here. If not, go to "Querying ZINC for Protomers"
This procedure generates decoys for your input ligand SMILES by finding decoy SMILES in ZINC that are property-matched. This procedure will provide decoy SMILES that you can build yourself into 3D models for docking. If you would like to query ZINC for decoy SMILES so that you can build decoys yourself or if your ligands are >400 Da, start here. If not, go to "Querying ZINC for Protomers" to generate decoys that already have 3D models.


=== Step 1) Setting up SMILES directory ===
=== Step 1) Setting up SMILES directory ===
Line 128: Line 137:
     SMILES YES
     SMILES YES
     PROTONATE YES
     PROTONATE YES
     MWT 20 125
     MWT 0 125
     LOGP 0.4 3.6
     LOGP 0 3.6
     RB 1 5
     RB 0 5
     HBA 0 4
     HBA 0 4
     HBD 0 3
     HBD 0 3
     CHARGE 0 2
     CHARGE 0 2
    LIGAND TC RANGE 0.0 0.35
     MINIMUM DECOYS PER LIGAND 20
     MINIMUM DECOYS PER LIGAND 20
     DECOYS PER LIGAND 50
     DECOYS PER LIGAND 50
Line 140: Line 150:
     GENERATE DECOYS 750
     GENERATE DECOYS 750
      
      
If your SMILES file is already protonated as you want it, set "PROTONATE NO". "SMILES" tells the function you want to query ZINC for SMILES, not built protomers.
If your input ligand SMILES file is already protonated as you want it, set "PROTONATE NO". "SMILES" tells the function you want to query ZINC for SMILES, not built protomers.


This file specifies that for each ligand protomer, {MINIMUM DECOYS PER LIGAND} to {DECOYS PER LIGAND} decoys will be retrieved with the following properties:
This file specifies that for each ligand protomer, {MINIMUM DECOYS PER LIGAND} to {DECOYS PER LIGAND} decoys will be retrieved with the following properties:
     - within 125 Daltons
     - within +/- 125 Daltons
     - within 3.6 logP
     - within +/- 3.6 logP
     - within 5 rotatable bonds
     - within +/- 5 rotatable bonds
     - within 4 hydrogen bond acceptors
     - within +/- 4 hydrogen bond acceptors
     - within 3 hydrogen bond donors
     - within +/- 3 hydrogen bond donors
     - within +/- 2 charge
     - within +/- 2 charge
     - 0.35 or less Tanimoto
     - 0.35 or less Tanimoto
Line 162: Line 172:




These are the default values, but you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.   
These are <B>arbitrary</B>, and you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.   


Once you have created this file, run the following command to create the decoy generation directory:
Once you have created this file, run the following command to create the decoy generation directory:
Line 195: Line 205:


     "test_ligdecoy_smiles.smi"
     "test_ligdecoy_smiles.smi"
     "Tc_matrix"
     "cluster_head.list"
    "Max_Tc_col"


Otherwise, this step will not run.
Otherwise, this step will not run.
Line 202: Line 211:
If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.
If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.


If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.
If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files have the format "SMILES", "ZINC ID", "logP", "#Rotatable Bonds", "# Hydrogen Bond Donors", "# Hydrogen Bond Acceptors", "Charge", "Protomer ID", and "Tanimoto Coefficient to Ligand".
 
These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.


=== Step 4) Setting up ligand/decoy directories for building SMILES ===
=== Step 4) Setting up ligand/decoy directories for building SMILES ===
Line 217: Line 228:


SMILES for decoys can now be built.
SMILES for decoys can now be built.
*** Note that building decoys can generate multiple protomers for the same ligand. This may result in docking decoys that were not completely property matched to your ligands. A script to identify the correct decoy protomer is under construction.
 
For decoy building, use the following command:
 
    setenv DOCKBASE /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk
    source /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk/env.csh
    ${DOCKBASE}/ligand/generate/build_database_ligand.sh -H $ph decoy_protomers.smi <B>--pre-tautomerized</B> --no-db
 
If not all decoys successfully build, more property matched decoys can be taken from the "{LIGAND_ID}_replacements.txt" files. Additionally, you can build decoys without the <B>--pre-tautomerized</B> flag:
 
    ${DOCKBASE}/ligand/generate/build_database_ligand.sh -H $ph <B>decoys.smi</B> --no-db
 
This will produce all protomers of each decoy, including the property-matched decoy protomer.


== Visualizing Decoy Properties ==
== Visualizing Decoy Properties ==

Revision as of 03:48, 18 September 2020

Written by Reed Stein on April 3, 2018.

updated 5/3/2019

updated 8/15/2019

updated 3/6/2020

updated 5/18/2020

This pipeline will generate property-matched decoys for a set of ligand SMILES. To build ligands yourself, see "ligand prep" in:

   http://wiki.docking.org/index.php/DOCK_3.7_tutorial_%28Anat%29

All scripts for this tutorial can be found in:

   /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/

Before running any scripts, make sure to source the current version of Python

  source /nfs/soft/python/envs/complete/current/env.csh

Additionally, JChem needs to be sourced in your ~/.cshrc file with the command:

  source /nfs/soft/jchem/current/env.csh

If the below script still not run:

  source /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk/env.csh

Querying ZINC for Protomers

This procedure generates decoys for your input ligands by searching through 3D conformers that are already built in ZINC. This procedure is advised if you want decoys to be charge-matched to ligands.

Step 1) Setting up directories for Protomers

Before starting, you need a SMILES file with the format (SMILES first, unique ID second):

  S(Nc1c(O)cc(C(=O)O)cc1)(c2c(scc2)C(=O)O)(=O)=O 116

You also need an input file named "decoy_generation.in" with the following lines:

   PROTONATE YES
   MWT 0 125
   LOGP 0 3.6
   RB 0 5
   HBA 0 4
   HBD 0 3
   CHARGE 0 2
   LIGAND TC RANGE 0.0 0.35
   MINIMUM DECOYS PER LIGAND 20
   DECOYS PER LIGAND 50
   MAXIMUM TC BETWEEN DECOYS 0.8
   TANIMOTO YES


If your input ligand SMILES file is already protonated as you want it, set "PROTONATE NO".

If you want your input ligand SMILES protonated, only protomer SMILES with unique properties will be kept for generating decoys. Therefore, if you have one ligand that exists in 4 tautomers, all of which have identical molecular weight, cLogP, # rotatable bonds, # H-bond acceptors and donors, and net charge, only one will be maintained for decoy matching. This doesn't apply if you set "PROTONATE NO".

This file specifies that for each ligand protomer, at least 20 decoys will be retrieved with the following properties:

    - within +/- 125 Daltons
    - within +/- 3.6 logP
    - within +/- 5 rotatable bonds
    - within +/- 4 hydrogen bond acceptors
    - within +/- 3 hydrogen bond donors
    - within +/- 2 charge
    - 0.35 or less Tanimoto
    - minimum 20 decoys per ligand protomer, if available
    - preferred 50 decoys per ligand protomer, if available
    - the maximum TC between decoy molecules should be 0.8
    - "TANIMOTO" refers to whether a Tanimoto calculation should be performed - see step 3 for when this is necessary

These are arbitrary, and you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.

Once you have created this file, run the following command to create the decoy generation directory:

  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0000_protonate_setup_dirs.py {SMILES_FILE} {NEW_DIR_NAME}

Provide a directory name that you want in place of {NEW_DIR_NAME}. This will create the directory with subdirectories named "ligand_${number}" for each of the ligands in the SMILES file you input.

Step 2) Retrieving protomer decoys from ZINC15

If you have edited the "decoy_generation.in" file which is now located in {NEW_DIR_NAME} as you want, you can run the following command:

   python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0001_qsub_generate_decoys.py {NEW_DIR_NAME}

This should take 15 minutes to an hour, depending on how many ligands you input.

Step 3) Assigning accepted protomer decoys to each ligand protomer

We can assign the property-matched decoys to the ligand protomers. Make sure you have the "decoy_generation_input.in" file from before in {NEW_DIR_NAME}.

To filter the decoys, run the following command:

   python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0002_qsub_filter_decoys.py {NEW_DIR_NAME}

This will run on the queue. A log file called "FILTER_DECOYS.log" will be generated in {NEW_DIR_NAME} with information and any errors.

If you don't get enough decoys, the "decoy_generation.in" file can be modified by changing "MAXIMUM TC BETWEEN DECOYS", "MINIMUM DECOYS PER LIGAND", etc. To not run the time-consuming Tanimoto calculation between all decoys again, simply add/change this in the "decoy_generation.in" file:

   TANIMOTO NO

If you set Tanimoto to "NO", make sure that your {NEW_DIR_NAME} still has the original files:

   "test_ligdecoy_smiles.smi"
   "cluster_head.list"

Otherwise, this step will not run.

If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.

If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. These files have the format "SMILES", "ZINC ID", "logP", "#Rotatable Bonds", "# Hydrogen Bond Donors", "# Hydrogen Bond Acceptors", "Charge", "Protomer SMILES", and "Tanimoto Coefficient to Ligand".

There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.

If you still cannot get enough decoys for your ligands, consider reducing the number of ligands you have by clustering, for example, or using the SMILES decoy generation below, which is not limited to only molecules that are already built in ZINC15.

Step 4) Copying decoy .db2.gz files into your directories

To copy property-matched decoys into your own directory of choice, run the following command:

   python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0003_copy_decoys_to_new_dir.py {NEW_DIR_NAME} {COPY_TO_DIR}

where {COPY_TO_DIR} is a new directory that will be created where your decoys will be copied into. In this directory, two subdirectories will be created:

    "ligands" - this includes the input ligands for which there are X number property matched decoys (these are all ligands with "{LIGAND_ID}_final_property_matched_decoys.txt" files in {NEW_DIR_NAME})
    "decoys" - this will include the decoy .db2.gz files for docking and "decoys.smi" which contains all the SMILES strings for property matched decoys

IMPORTANT: It is possible that all of your ligand protomers were not matched to property-matched decoys. The "ligands.smi" file in {COPY_TO_DIR} will not include these. Make sure you do not dock these if you calculate enrichment values.

Querying ZINC for SMILES

This procedure generates decoys for your input ligand SMILES by finding decoy SMILES in ZINC that are property-matched. This procedure will provide decoy SMILES that you can build yourself into 3D models for docking. If you would like to query ZINC for decoy SMILES so that you can build decoys yourself or if your ligands are >400 Da, start here. If not, go to "Querying ZINC for Protomers" to generate decoys that already have 3D models.

Step 1) Setting up SMILES directory

Before starting, you need a SMILES file with the format (SMILES first, ID second):

  S(Nc1c(O)cc(C(=O)O)cc1)(c2c(scc2)C(=O)O)(=O)=O 116

You also need an input file named "decoy_generation.in" with the following lines:

   SMILES YES
   PROTONATE YES
   MWT 0 125
   LOGP 0 3.6
   RB 0 5
   HBA 0 4
   HBD 0 3
   CHARGE 0 2
   LIGAND TC RANGE 0.0 0.35
   MINIMUM DECOYS PER LIGAND 20
   DECOYS PER LIGAND 50
   MAXIMUM TC BETWEEN DECOYS 0.8
   TANIMOTO YES
   GENERATE DECOYS 750
   

If your input ligand SMILES file is already protonated as you want it, set "PROTONATE NO". "SMILES" tells the function you want to query ZINC for SMILES, not built protomers.

This file specifies that for each ligand protomer, {MINIMUM DECOYS PER LIGAND} to {DECOYS PER LIGAND} decoys will be retrieved with the following properties:

    - within +/- 125 Daltons
    - within +/- 3.6 logP
    - within +/- 5 rotatable bonds
    - within +/- 4 hydrogen bond acceptors
    - within +/- 3 hydrogen bond donors
    - within +/- 2 charge
    - 0.35 or less Tanimoto

"GENERATE DECOYS" specifies how many potential decoys you want to check for property matching with your ligands. A smaller number results in faster decoy generation, but a smaller pool of potential decoys to compare your ligand against. A larger number results in slower decoy generation, and greater likelihood of property-matched decoys for all your ligands.

As with protomers, "MINIMUM DECOYS PER LIGAND" refers to the minimum number of decoys you want for each ligand protomer;

"DECOYS PER LIGAND" refers to your preferred number of decoys for each ligand protomer;

"MAXIMUM TC BETWEEN DECOYS" refers to the maximum Tc allowed between decoys (the lower, the more dissimilar your decoys will be);

and "TANIMOTO" refers to whether the ligand-decoy full Tc matrix should be calculated - this must be done at least once and should not be set to "NO" unless you are re-running step 3.


These are arbitrary, and you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.

Once you have created this file, run the following command to create the decoy generation directory:

  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0000_protonate_setup_dirs.py {SMILES_FILE} {NEW_DIR_NAME}

Provide a directory name that you want in place of {NEW_DIR_NAME}. This will create the directory with subdirectories named "ligand_${number}" for each of the ligands in the SMILES file you input.

Step 2) Retrieving SMILES decoys from ZINC15

If you have edited the "decoy_generation.in" file which is now located in {NEW_DIR_NAME} as you want, you can run the following command:

   python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0001_qsub_generate_decoys.py {NEW_DIR_NAME}

Jobs will run for 15 minutes to 1-2 hours depending on how many ligands you input.

Step 3) Assigning decoys to ligands

To assign property matched decoys to your ligand protomers, run the following command:

   python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0002_qsub_filter_decoys.py {NEW_DIR_NAME}

This will run on the queue. As with "Querying ZINC for Protomers":

If you don't get enough decoys, the "decoy_generation.in" file can be modified by changing "MAXIMUM TC BETWEEN DECOYS", "MINIMUM DECOYS PER LIGAND", etc. To not run the time-consuming Tanimoto calculation between all ligands and decoys again, simply add/change this in the "decoy_generation.in" file:

   TANIMOTO NO

If you set Tanimoto to "NO", make sure that your {NEW_DIR_NAME} still has the original files:

   "test_ligdecoy_smiles.smi"
   "cluster_head.list"

Otherwise, this step will not run.

If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.

If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files have the format "SMILES", "ZINC ID", "logP", "#Rotatable Bonds", "# Hydrogen Bond Donors", "# Hydrogen Bond Acceptors", "Charge", "Protomer ID", and "Tanimoto Coefficient to Ligand".

These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.

Step 4) Setting up ligand/decoy directories for building SMILES

If you have queried ZINC for SMILES, you need to build the decoys yourself. To write the SMILES file, run the following command:

  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0003b_write_out_ligands_decoys.py {NEW_DIR_NAME} {COPY_TO_DIR}

This will create {COPY_TO_DIR} with two subdirectories, "ligands" and "decoys" as well as SMILES files for:

   ligands.smi - this includes the input ligands for which there are X number property matched decoys (these are all ligands with "{LIGAND_ID}_final_property_matched_decoys.txt" files in {NEW_DIR_NAME})
   decoys.smi  - this includes the canonicalized property-matched decoy SMILES
   decoy_protomers.smi - this includes the actual property-matched decoy protomer SMILES

SMILES for decoys can now be built.

For decoy building, use the following command:

   setenv DOCKBASE /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk
   source /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk/env.csh
   ${DOCKBASE}/ligand/generate/build_database_ligand.sh -H $ph decoy_protomers.smi --pre-tautomerized --no-db

If not all decoys successfully build, more property matched decoys can be taken from the "{LIGAND_ID}_replacements.txt" files. Additionally, you can build decoys without the --pre-tautomerized flag:

   ${DOCKBASE}/ligand/generate/build_database_ligand.sh -H $ph decoys.smi --no-db

This will produce all protomers of each decoy, including the property-matched decoy protomer.

Visualizing Decoy Properties

Visualizing property distributions

To visualize the distributions of molecular properties of matched decoys relative to the ligands, run the following command:

   python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0004_plot_properties.py {NEW_DIR_NAME}

There will be 6 images in {NEW_DIR_NAME} for molecular weight, logP, number of rotatable bonds, number of hydrogen bond donors, number of hydrogen bond acceptors, and net charge of ligands and decoys.

Visualizing decoy Tanimotos to ligands

To visualize how different the matched decoys are to the input ligands, run the following command:

  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0005_plot_tanimoto_to_lig.py {NEW_DIR_NAME}

There will be a box and whisker plot image in {NEW_DIR_NAME} showing the Tanimotos calculated between each ligand and all decoys.