Arthor Documentation for Future Developer: Difference between revisions

From DISI
Jump to navigation Jump to search
mNo edit summary
 
(85 intermediate revisions by the same user not shown)
Line 1: Line 1:
Written by Jennifer Young on December 16, 2019. Last edited Dec 17, 2021 by JJ Gutierrez.
== Introduction ==
[https://www.nextmovesoftware.com/downloads/arthor/documentation/Arthor.pdf Here is the link to Arthor's manual]
* Username: ucsf@nextmovesoftware.com
* Password: <Ask jjiteam@googlegroups.com>


==Install and Set Up on TomCat (Method 1)==
Arthor configurations and the frontend files are consolidated in '''/nfs/soft2/arthor_configs/'''.
Arthor ran on n-1-136, which runs CentOS Linux release 7.7.1908 (Core).  You can check the version of CentOS with the following command
    cat /etc/centos-release


Check your current version of Java with the following command:
'''/nfs/soft2/arthor_configs/start_arthor_script.sh''' can start/restart Arthor instances on respective machines.
    java -version


On n-1-136 we are running openjdk version "1.8.0_222", OpenJDK Runtime Environment (build 1.8.0_222-b10), and OpenJDK 64-Bit Server VM (build 25.222-b10, mixed mode)
Launch the script to see the options available.
If Java is not installed, install it using yum


==See this wiki page for more detailed information about installing Tomcat on our cluster==
== How To Download Arthor ==
http://wiki.docking.org/index.php/Tomcat_Installation
# Ssh to nfs-soft2 and become root. Prepare directory
#: <source> mkdir /export/soft2/arthor_configs/arthor-<version> && cd /export/soft2/arthor_configs/arthor-<version> </source>
# [https://www.nextmovesoftware.com/downloads/arthor/ Download Software with this link]
#* Username: ucsf@nextmovesoftware.com
#* Password: <Ask jjiteam@googlegroups.com>
# Go to releases. Look for ''' smallworld-java-<version>.tar.gz ''' and copy the link address.
# Download using wget
#: <source> wget --user ucsf@nextmovesoftware.com --password <Ask jjiteam@googlegroups.com> <link address> </source>
# Decompress the file
#* <source> tar -xvf <file_name> </source>


==Open port for Arthor==
== How To Launch Arthor For The First Time ==
In order for Arthor to be usable in the browser, the port you wish to run it on must be opened.
=== Prepare Files and Directories ===
https://www.thegeekdiary.com/how-to-open-a-ports-in-centos-rhel-7/
# Ssh to nfs-exc and become root
 
# Open a port in the firewall
===Step 1: Check Port Status===
#: <source>firewall-cmd --permanent --add-port=<port_number>/tcp  
Check that the port is not open and that Apache is not showing that port.
firewall-cmd --reload
    netstat -na | grep <port number you are checking>
</source>
 
# Go to Arthor Config directory
    lsof -i -P |grep http
#: <source>cd /export/soft2/arthor_configs/arthor-<latest_version></source>
 
# Create an Arthor config file
===Step 2: Check Port Status in IP Tables===
#: <source>vim <name_of_file>.cfg</source>
    iptables-save | grep <port number you are checking>
#* Add these lines in the file. Check the manual for more options.
 
#: <source>
I skipped Step 3 from the guide, because there was a lot of information in the /etc/services file and I didn't want to edit it and break something.
DataDir=/local2/public_arthor
 
MaxConcurrentSearches=6
===Step 4: Open Firewall Ports===
MaxThreadsPerSearch=8
I did not include the zone=public section because the stand-alone servers are usually used for private instances of Arthor and SmallWorld.
AutomaticIndex=false
Run as root.
AsyncHitCountMax=20000
    firewall-cmd --add-port=<port number you are adding>/tcp --permanent
Depiction=./depict/bot/svg?w=%w&h=%h&svgunits=px&smi=%s&zoom=0.8&sma=%m&smalim=1
 
Resolver=https://sw.docking.org/util/smi2mol?smi=%s
You need to reload the firewall after a change is made.
</source>
    firewall-cmd --reload
=== Start Arthor Instance ===
 
# Now ssh into a machine you wish to run an Arthor instance on and become root
===Step 5: Check that port is working===
# Change your shell to bash if you havn't already
To check that the port is active, run.
#: <source>bash</source>
    iptables -nL
# Create a screen
 
#: <source>screen -S <screen_name></source>
You should see something along the lines of:  
# Prepare Arthor Config Path
    ACCEPT    tcp  --  0.0.0.0/0            0.0.0.0/0            tcp dpt:<port number you're adding> ctstate NEW,UNTRACKED
#: <source>export ARTHOR_CONFIG="/nfs/soft2/arthor_configs/arthor-<version>/<name_of_config_file>.cfg"</source>
 
# Launch java
==How to run standalone Arthor instance==
#: <source>java -jar -Dserver.port=<port_number> /nfs/soft2/arthor_configs/arthor-<version>/arthor-server-<version>.war</source>
 
===Step 1: Use or start a bash shell===
You can check your default shell using
    echo $SHELL
 
If your default shell is csh, use
    bash
to start a new bash shell in the current terminal window. Note that echo $SHELL will show you your default shell regardless of the current shell.
 
===Step 2: Set your environment variables===
    export ARTHOR_DIR=/opt/nextmove/arthor/arthor-3.3-centos7
    export PATH=$ARTHOR_DIR/bin/:$PATH
 
Make sure the ARTHOR_DIR variable is set to the directory for the latest version of Arthor or whichever version you would like to test.
The PATH environment variable is needed if you wish to use the Arthor tools from the command line
 
===Step 3: Run the arthor-server.jar===
    java -jar /opt/nextmove/arthor/arthor-3.3-centos7/java/arthor.jar --httpPort <your httpPort>
 
==Setting environment variables for an Arthor Server==
Set the environment variables in the setenv.sh file.  Note: Be sure to edit the file in the directory corresponding to the latest version of TomCat.  As of December 2019, we are running 9.0.27 on n-1-136.
 
  vim  /opt/tomcat/apache-tomcat-9.0.27/bin/setenv.sh
 
Add the line below to the setenv.sh file above, or substitute the path to wherever you currently store the arthor.cfg file
  export ARTHOR_CONFIG=/usr/local/tomcat/arthor.cfg
 
Here is an example of the arthor.cfg file:
  BinDir=/opt/nextmove/arthor/arthor-3.3-centos7/bin
  DataDir=/local2/arthor_local_8081/
  MaxConcurrentSearches=6
  MaxThreadsPerSearch=8
  AutomaticIndex=false
  AsyncHitCountMax=1000000
  Resolver=https://sw.docking.org/util/smi2mol?smi=%s


=== Configuration Details ===
=== Configuration Details ===
*'''BinDir''': is the location of the Arthor command line binaries.  These are used to generate the Arthor index files and to perform searches directly on n-1-136.  An example of this would be using atdbgrep for substructure search.


*'''DataDir''': This is the directory where the Arthor data files live.  Location where the index files will be created and loaded from.
*'''DataDir''': This is the directory where the Arthor data files live.  Location where the index files will be created and loaded from.
Line 97: Line 68:
*'''Resolver''': Using Smallworld API, allows input box to take in a SMILE format and automatically draw on the board.
*'''Resolver''': Using Smallworld API, allows input box to take in a SMILE format and automatically draw on the board.


Check Arthor manual for more configuration options.
'''Check Arthor manual for more configuration options'''


==Background==
== How to Build Arthor Databases==
Before working with Arthor, it is recommended that you familiarize yourself with the Arthor documentation. Some useful pages to look at include 3-5, 22-25 and 33-39. Of course, reading everything would be the best!
We can build Arthor Databases anywhere. Consolidate smiles into one directory so you can index them all one by one.


==Checking Disk Space Usage==
Just use the script located at '''/nfs/home/jjg/scripts/arthor_index_script.sh''' at the directory where you stored the smiles.
Before building arthor indexes, it's always a good thing to check what percent of the memory is being used. Try to be cautious with how much memory you have left, and make sure to check while building indexes to make sure that you have enough space. To check, run the following command:


  df -h /<directory with disc>
Here is the content of the script:
<source>
#!/bin/bash


==Building Large Databases==
target="*.smi"
At the moment, we are building databases of size 500M molecules by merging smile files. There are multiple methods of trying to create large databases, one being merging based off of the same H?? prefix and stopping once the database reaches > 500M molecules (or whatever upperbound you want to use). Here is some python code that simulates this merging process. Essentially the program takes all of the .smi files within an input directory, sorts them lexiographically, and begins merging these .smi files together in order until the size reaches > 500M molecules.
threads='48'
 
version="3.6.1"
Feel free to modify it if you think a better method exists.
 
  import subprocess
  import sys
  import os                                                                                                                                                                         
 
  from os import listdir
  from os.path import isfile, join
 
  mypath = "<Path to directory holding .smi files>"
  onlyfiles = [f for f in listdir(mypath) if isfile(join(mypath, f))]
  onlyfiles.sort()
 
  create_fp = True
  cur_mols = 0
  lower_bound = 500000000
  upper_bound = 600000000
  files_to_merge = []
 
  def merge_files(f_t_m):
      arr = f_t_m[0].split(".")
      arr2 = f_t_m[len(f_t_m) - 1].split(".")
      file_name_merge = (arr[0] + "_" + arr2[0] + ".smi")
      print ("File being created: " + file_name_merge)
 
      for file in f_t_m:
        tmp = file.split(".")
        process = subprocess.Popen("cat " + join(mypath, file) + " >> " + file_name_merge, shell=True)
        process.wait()
 
  for file in onlyfiles:
      arr = file.split(".")
 
      if (arr[len(arr) - 1] == "smi"):
        print("Working with " + file)
        mol = sum(1 for line in open(join(mypath, file)))
        print(file, mol, cur_mols)
 
        if (cur_mols + mol > lower_bound):
            if (cur_mols + mol < upper_bound):
              files_to_merge.append(file)
              merge_files(files_to_merge)
              cur_mols = 0
              files_to_merge.clear()
            else:
              merge_files(files_to_merge)
              files_to_merge.clear()
              files_to_merge.append(file)
              merge_files(files_to_merge)
              cur_mols = 0
              files_to_merge.clear()
        else:
            cur_mols += mol
            files_to_merge.append(file)
 
  if (len(files_to_merge) != 0):
      merge_files(files_to_merge)


==Building Arthor Indexes==
Once you've merged the .smi files together, it's time to start building the databases themselves. To do this we use the command


  smi2atdb -j 0 -p <The .smi file> <The .atdb>
export ARTHOR_DIR=/nfs/soft2/arthor_configs/arthor-$version/arthor-$version-centos8/
export PATH=$ARTHOR_DIR/bin/:$PATH


The flag "-j 0" enables parallel generation and utilizes all available processors to generate the .atdb file. The "-p" flag stores the offset position in the ATDB file. Since we're building indexes for the Web Application, you must use the "-p" flag when building indexes. Please note that the name of the .smi file should also be the name of the .atdb file. That way, the Web Application knows to use these files together and correctly display the required images. Refer to pages 33-34 in the Arthor documentation for more information.
for j in $target
do
        echo 'smi2atdb -v -r -j '$threads' -p '$j' '${j}'.atdb |& tee -a '${j}'_log'
        time smi2atdb -v -r -j $threads -p $j ${j}.atdb |& tee -a ${j}_log
echo 'smi2atfp -j '$threads' -p '$j' '${j}.atfp' |& tee -a '${j}'_log'
        time smi2atfp -j $threads -p $j ${j}.atfp |& tee -a ${j}_log
done


If there are too many large .smi files and you do not want to manually build each .atdb file, you can use this python script which takes all of the .smi files in the current directory and converts them to .atdb files. Make sure to modify mypath to the directory containing the .smi files. You can change the variable "create_fp" to false if you don't want to create .atdb.fp files (refer to page 9 in the Arthor documentation).
for i in $target*atdb
do
echo 'atdb2fp -j '$threads' '$i
        time atdb2fp -j $threads $i
chmod 744 $i.fp
done
</source>


  import subprocess
=== Command Details ===
  import sys
'''smi2atdb''' creates the atdb files needed for Substructure searching.
  import os
*'''-v''' verbose
 
*'''-r''' Compute and store ring size information in the index allowing ring size (3-10) expressions ([r6] and [Z5])
  from os import listdir
*'''-j''' is the amount of threads to use to index the smiles file
  from os.path import isfile, join
*'''-p''' stores the position of the original file
 
'''atdb2fp''' makes substructure searching faster
  mypath = "<Path containing the .smi files"
  onlyfiles = [f for f in listdir(mypath) if isfile(join(mypath, f))]
 
  create_fp = True
 
  for file in onlyfiles:
      arr = file.split(".")
 
      if (arr[len(arr) - 1] == "smi"):
        process = subprocess.Popen("/nfs/ex9/work/xyz/psql/arthor-3.3-centos7/bin/smi2atdb -j 0 -p {0} {1}.atdb".format(join(mypath, file), arr[0]), shell=True)
        process.wait()
 
        print("SUCCESS! {0}.atdb file was created!".format(arr[0]))
 
        if (create_fp):
            process = subprocess.Popen("/nfs/ex9/work/xyz/psql/arthor-3.3-centos7/bin/atdb2fp -j 0 {0}.atdb".format(arr[0]), shell=True)
            process.wait()
     
            print("SUCCESS! {0}.atdb.fp file was created!".format(arr[0]))


==Uploading Indexes to the Web Application==
'''smi2atfp''' creates atfp files for similarity searching
One can upload indexes to the Web Application by changing the "DATADIR" variable in the arthor.cfg file to the directory holding the .atdb files. This is already set up on n-1-136 and n-5-34.
 
==Virtual Memory==
In addition to modifying the arthor.cfg file, virtual memory can also be used to make queries faster. There can still be More information can be found in pages 10-16 in the Arthor Documentation.


==Setting up Round Table==
==Setting up Round Table==
This is a new feature in Arthor 3.0 and is currently beta (January 2020). See section 2.4 in the manual
"Round Table allows you to serve and split chemical searches across multiple host machines.  The implementation provides a lightweight proxy that forwards requests to other Arthor host servers that do the actual search.  Communication is done using the existing Web APIs.
As explained in the manual, "Round Table allows you to serve and split chemical searches across multiple host machines.  The implementation provides a lightweight proxy that forwards requests to other Arthor host servers that do the actual search.  Communication is done using the existing Web APIs.
 
Since Arthor requires CentOS 7, as of January 2020 we have 6 servers that are capable of running Arthor with Round Table.
 
===Setting up Host Server===
===Setting up Host Server===
If we want to add machines to the Round Table, for example 'nun' and 'samekh', we need to edit their arthor.cfg file so that when our Local Machine passes commands these secondary servers know to perform the search they are given.
# Ssh to nfs-soft2 and become root
 
# Open a port in the firewall
  $ cat arthor.cfg
#: <source>firewall-cmd --permanent --add-port=<port_number>/tcp
  MaxThreadsPerSearch=4
firewall-cmd --reload
  AutomaticIndex=false
</source>
  DATADIR=<Directory where smiles are located>
# Go to Arthor Config Directory
 
#: <source>cd /export/soft2/arthor_configs/arthor-<version></source>
We then run the jar server on each of these host machines containing data on any available port.
# Create Round Table Head configuration file. Here is an example:
 
# <source>
  java -jar /nfs/ex9/work/xyz/psql/arthor-3.3-centos7/java/arthor.jar --httpPort <port>
[RoundTable]
 
RemoteClient=http://10.20.0.41:8008
For our local machine, the arthor.cfg file will look different.
RemoteClient=http://10.20.5.19:8008
 
Resolver=https://sw.docking.org/util/smi2mol?smi=%s
  $ cat arthor.cfg
</source>
  [RoundTable]  
# Now ssh into a machine you wish to run the round table head on and become root
  RemoteClient=http://skynet:<port number where jar server is running>/
# Change your shell to bash if you havn't already
  RemoteClient=http://hal:<port number where jar server is running>/
#: <source>bash</source>
 
# Create a screen
Please refer to Section 2 in the RoundTable Documentation file (pages 6-8) for more useful information on configuration.
#: <source>screen -S <screen_name></source>
 
# Prepare Arthor Config Path
Then run the following command on n-1-136:
#: <source>export ARTHOR_CONFIG="/nfs/soft2/arthor_configs/arthor-<version>/<round_table_head>.cfg"</source>
# Launch java
  java -jar /nfs/ex9/work/xyz/psql/arthor-3.3-centos7/java/arthor.jar --httpPort <port>
#: <source>java -jar /nfs/soft2/arthor_configs/arthor-<version>/arthor-<version>-centos7/java/arthor.jar --httpPort=<port_number></source>
 
==='''***Arthor configs and frontend code are located in /nfs/exc/arthor_configs/***'''===


== Active Arthor Instances ==
===Public Arthor===
===Public Arthor===
{| class="wikitable"
{| class="wikitable"
|-
|-
! CentOS 7 Machine
! Rocky Linux Machine
! Port
! Port
! Round Table Data Directory
! Round Table Data Directory
! Active
! Which Arthor
|-
| samekh
| 10.20.0.41:8000
| /local2/public_arthor/
| active
|-
| nun
| 10.20.0.40:8000
| /local2/public_arthor/
| active
|-
|-
| n-9-22
| arthor
| 10.20.9.22:8000
| 10.20.200.100:8080
| /export/db4/public_arthor/
| /local3/public_arthor/
| active
| Public Arthor
|-
|-
|}
|}


===Arthor Round Table Head===
===Private Arthor===
{| class="wikitable"
{| class="wikitable"
|-
|-
! CentOS 7 Machine
! Rocky Linux Machine
! Port
! Port
! Round Table Data Directory
! Round Table Data Directory
! Active
! Which Arthor
|-
|-
| samekh
| arthor
| 10.20.0.41:8080
| 10.20.200.100:8081
| /local2/arthor_database/
| /local3/private_arthor/
| active
| Private Arthor
|-
| nun
| 10.20.0.40:8080
| /local2/arthor_database/
| active
|-
|-
|}
|}


===Arthor Round Table Nodes===
===Super Private Arthor===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 294: Line 177:
! Port
! Port
! Round Table Data Directory
! Round Table Data Directory
!Active
! Which Arthor
|-
|-
| samekh
| nun
| 10.20.0.41:8008
| 10.20.0.40:8080
| /local2/arthor_database/
| Round table head has no directory
| active
| Super Private Arthor Round Table Head Node
|-
|-
| nun
| nun
| 10.20.0.40:8008
| 10.20.0.40:8008
| /local2/arthor_database/
| /local2/public_arthor/
| active
| Super Private Arthor Database Node
|-
|-
| n-1-17
| samekh
| 10.20.1.17:8008
| 10.20.0.41:8008
| /local2/arthor_database/
| /local2/public_arthor/
| not active
| Super Private Arthor Database Node
|-
| n-5-32
| 10.20.5.32:8008
| /local2/arthor_database/
| not active
|-
| n-5-33
| 10.20.5.33:8008
| /local2/arthor_database/
| not active
|-
|-
|}
|}


===Arthor Local 8081 (Datasets all local to samekh/nun)===
===Arthor BB and CC===
{| class="wikitable"
{| class="wikitable"
|-
|-
! CentOS 7 Machine
! CentOS 7 Machine
! Port
! Port
! Round Table Data Directory
! Data Directory
!Active
! Which Arthor
|-
|-
| samekh
| epyc-A40
| 10.20.0.41:8081
| 10.20.200.92:8081
| /local2/arthor_local_8081/
| /local2/arthorbb
| not active
| ArthorBB
|-
|-
| nun
| epyc-A40
| 10.20.0.40:8081
| 10.20.200.92:8082
| /local2/arthor_local_8081/
| /local2/arthorcc
| not active
| ArthorCC
|-
|-
|}
|}


== Customizing Arthor Frontend to our needs ==
== Customizing Arthor Frontend To Our Needs (Arthor 3.6.1) ==
The frontend Arthor code is located at '''/nfs/exc/arthor_configs/*''' and the '''*''' is based on current running version.
'''These instructions only worked and compiled for me in the machine called epyc which is running Rocky 8 Linux operating system.'''
=== Add Arthor Download Options ===
 
==== For Arthor 3.4: ====
Summary of changes in index.html:
1. vim .extract/webapps/ROOT/WEB-INF/static/index.html
*Add contact info
*Advertise TLDR
*Remove button for Formula
*Database Information Link
 
Summary of changes in index.js:
*Hyperlink the results to zinc20
 
Summary of changes in sketcher.js:
*Input box should be updated as user draws molecule
 
Summary of changes in arthor-swagger.yaml.js:
*Input box should be updated as user draws molecule
 
 
=== Install Prerequisite Packages ===
# Install Apache Maven
#* <source>dnf install maven -y</source>
# Install Node Package Manager (NPM)
#* <source>dnf install npm -y</source>
# In your home directory, create a new directory to hold the files for the upcoming procedures
#* <source>mkdir /mnt/nfs/home/jjg/arthor_build_from_source</source>
# Download these latest Arthors and store them in 'arthor_build_from_source/'. [[Arthor Documentation for Future Developer#How To Download Arthor|Here's how to download Arthor.]]
#* arthor-3.6.1-source.tar.gz
#* arthor-3.6.1-centos7.tar.gz
# Extract contents from the tar.gz files
#* <source>tar -xvf arthor-3.6.1-source.tar.gz
tar -xvf arthor-3.6.1-centos7.tar.gz</source>
# Install Apache Maven Arthor dependencies through this script
#* <source>
#!/bin/bash
 
export ARTHOR_DIR=/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-centos8/java
export OS=linux
export VERSION=3.6.1
 
mvn install:install-file -Dfile=$ARTHOR_DIR/arthor-jni-${OS}.jar \
                        -Dpackaging=jar \
                        -DgeneratePom=true \
                        -DartifactId=arthor-jni-${OS} \
                        -DgroupId=com.nextmovesoftware.arthor \
                        -Dversion=$VERSION
mvn install:install-file -Dfile=$ARTHOR_DIR/arthor-jni.jar \
                        -Dpackaging=jar \
                        -DgeneratePom=true \
                        -DartifactId=arthor-jni \
                        -DgroupId=com.nextmovesoftware.arthor \
                        -Dversion=$VERSION
</source>
=== Customizing Index.html ===
Location: /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/index.html
 
==== Add contact info and tldr ====
# vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/index.html
# Search for 'arthor_table_list'
#* <source>?arthor_table_list</source>
# Add contact info, a plug to tldr.docking.org, and database link after the div block where arthor_table_list is inside of. It should look like this
#* <source>
      <div class="opt-box-border">
        <label>Databases</label>
        <!-- This will be populated by available databases -->
        <ul id="arthor_table_list">
          <li class="placeholder">Please select a search type</li>
        </ul>
      </div>
      <div class="opt-box-border">
        <label>Ask Questions</label>
        Email us: jjiteam@googlegroups.com
      </div>
      <div class="opt-box-border">
        <label> To Download 100K+ Results</label>
        Sign up for <a href="http://tldr.docking.org/">tldr.docking.org</a> and use arthorbatch
      </div>
      <div class="opt-box-border">
        <label> Database Information</label>
        <a href="https://wiki.docking.org/index.php/Smallworld_and_Arthor_Databases#Smallworld_Databases" target="_blank">Database Information Link</a>
      </div>
</source>
 
==== Add Database Information Link ====
 
 
==== Remove Similarity and Formula Buttons ====
# vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/index.html
# Search for 'arthor_search_list'
#* <source> ?arthor_search_list </source>
# Delete and Replace the whole 'ul' element block with this
#* <source>
          <li value="Similarity" onclick="setSearchType(this)" class="first">
            Similarity
          </li><li value="Substructure" onclick="setSearchType(this)">
            Substructure
          </li><li value="SMARTS" onclick="setSearchType(this)" class="last">
            SMARTS
          </li>
          <!--<li value="Formula" onclick="setSearchType(this)" class="last">
            Formula
          </li>-->
</source>
 
=== Customize Index.js ===
Location /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-source/server-ui/src/index.js
 
# Add the zinc20 hyperlink to the Arthor results. Search for this
#* <source>
"<b>" + id + "</b>"
</source>
# Delete the contents of the whole else block and replace it with this
#* <source>
            if (id.substring(0, 6) == "ZINC00") {
                $info.append(
                  $('<tr>').append(
                    $('<td>').append("<b><a target='_blank' href='https://zinc20.docking.org/substances/"+id+"'>" + id + "</a></b>",
                                    "<span class='table_name'>" + table_name + "</span>")));
            } else if (id.substring(0,4) == "ZINC" && id.substring(4,6) != "00") {
                $info.append(
                  $('<tr>').append(
                    $('<td>').append("<b><a target='_blank' href='https://cartblanche22.docking.org/substance/"+id+"'>" + id + "</a></b>",
                                    "<span class='table_name'>" + table_name + "</span>")));
            } else {
                $info.append(
                  $('<tr>').append(
                    $('<td>').append("<b>" + id + "</b>")));
            }
</source>
 
=== Customize Sketcher.js ===
Location: /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-source/server-ui/src/sketcher.js
 
==== Input Box Updates as User Draws ====
#vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-source/server-ui/src/sketcher.js
#Search for this line "var smiles = event.src.smiles();"
#* <source>?var smiles = event.src.smiles();</source>
#Add this new line below it
#* <source>$('#ar_text_input').val(smiles);</source>


2. search: '''arthor_tsv_link'''
=== Customize arthor-swagger.yaml ===
Location: /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/swagger/arthor-swagger.yaml


3. in the div with the class=”dropdown-content”, add these link options and change the number accordingly:
==== Change URL Base Path for API Call ====
# vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/swagger/arthor-swagger.yaml
# Search for "servers"
#* <source>?basePath</source>
# Remove "/arthor" and keep argument empty


              <a id="arthor_tsv_link" href="#"> TSV-500</a>
=== Compile/Minify Code through NPM ===
              <a id="arthor_tsv_link_5000" href="#"> TSV-5,000</a>
# Install NPM packages and Minify Code
              <a id="arthor_tsv_link_50000" href="#"> TSV-50,000</a>
#* <source>
              <a id="arthor_tsv_link_100000" href="#"> TSV-100,000</a>
cd /nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server-ui
              <a id="arthor_tsv_link_max" href="#"> TSV-max</a>
npm install
              <a id="arthor_csv_link" href="#"> CSV-500</a>
npx webpack-dev-server
              <a id="arthor_csv_link_5000" href="#"> CSV-5,000</a>
npx webpack --mode=production
              <a id="arthor_csv_link_50000" href="#"> CSV-50,000</a>
</source>
              <a id="arthor_csv_link_100000" href="#"> CSV-100,000</a>
# If the npx commands don't work, try updating node and npm version to the latest one.
              <a id="arthor_csv_link_max" href="#"> CSV-max</a>
# Build the war file
              <a id="arthor_sdf_link" href="#"> SDF-500</a>
#* <source>
              <a id="arthor_sdf_link_5000" href="#"> SDF-5,000</a>
cd /nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server
              <a id="arthor_sdf_link_50000" href="#"> SDF-50,000</a>
mvn install -Pbootable
              <a id="arthor_sdf_link_100000" href="#"> SDF-100,000</a>
</source>
              <a id="arthor_sdf_link_max" href="#"> SDF-max</a>
# If it works, then the path to new war file is at /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.4.7/arthor-3.4.7-source/server/target/arthor-server-3.4.7.war


4. then vim .extract/webapps/ROOT/WEB-INF/static/js/index.js
== Adding Arthor to Systemd (example) ==
# Create service files
#: <source>
touch /etc/systemd/system/arthor.service
</source>
# Add this code block in the service file
#: <source>


5. search: '''function $(t){'''
[Unit]
Description=Arthor Public Instance
After=network.target


6. in the function $(t), add these lines:
[Service]
Type=exec
Restart=always
RestartSec=3
User=root
ExecStart=/usr/bin/bash /nfs/soft2/arthor_configs/start_arthor_service.sh -public
ExecStop=/bin/kill -15 $MAINPID


if(document.getElementById("arthor_tsv_link")) {
[Install]
        var e=i.a.param({query:s.b.query,type:s.b.type,draw:0,start:0,length:t,flags:s.b.flags}),n=s.b.url+"/dt/"+E(s.b.table)+"/search";i()("#arthor_sdf_link").attr("href",n+".sdf?"+e),i() ("#arthor_tsv_link").attr("href",n+".tsv?"+e),i()("#arthor_csv_link").attr("href",n+".csv?"+e)
WantedBy=multi-user.target
}
</source>
if (document.getElementById("arthor_tsv_link_5000")) {
# Change "ExecStart" to other Arthor Instances
        var e=i.a.param({query:s.b.query,type:s.b.type,draw:0,start:0,length:5000,flags:s.b.flags}),n=s.b.url+"/dt/"+E(s.b.table)+"/search";i()("#arthor_sdf_link_5000").attr("href",n+".sdf?"+e),i()("#arthor_tsv_link_5000").attr("href",n+".tsv?"+e),i()("#arthor_csv_link_5000").attr("href",n+".csv?"+e)
}
if (document.getElementById("arthor_tsv_link_50000")) {
        var e=i.a.param({query:s.b.query,type:s.b.type,draw:0,start:0,length:50000,flags:s.b.flags}),n=s.b.url+"/dt/"+E(s.b.table)+"/search";i()("#arthor_sdf_link_50000").attr("href",n+".sdf?"+e),i()("#arthor_tsv_link_50000").attr("href",n+".tsv?"+e),i()("#arthor_csv_link_50000").attr("href",n+".csv?"+e)
}
if (document.getElementById("arthor_tsv_link_100000")) {
        var e=i.a.param({query:s.b.query,type:s.b.type,draw:0,start:0,length:100000,flags:s.b.flags}),n=s.b.url+"/dt/"+E(s.b.table)+"/search";i()("#arthor_sdf_link_100000").attr("href",n+".sdf?"+e),i()("#arthor_tsv_link_100000").attr("href",n+".tsv?"+e),i()("#arthor_csv_link_100000").attr("href",n+".csv?"+e)
}
if (document.getElementById("arthor_tsv_link_max")) {
        var e=i.a.param({query:s.b.query,type:s.b.type,draw:0,start:0,length:1000000000,flags:s.b.flags}),n=s.b.url+"/dt/"+E(s.b.table)+"/search";i()("#arthor_sdf_link_max").attr("href",n+".sdf?"+e),i()("#arthor_tsv_link_max").attr("href",n+".tsv?"+e),i()("#arthor_csv_link_max").attr("href",n+".csv?"+e)
}


=== Take out Similarity Button ===
== Restarting Arthor Instance(s) Instructions ==
vim .extract/webapps/ROOT/WEB-INF/static/index.html
=== Public and Private Arthor ===
search: '''Similarity'''
# ssh to "arthor" server and run
Comment out this line '''< li value="Similarity" onclick="setSearchType(this)" class="first"> Similarity </li >''' //added spaces at the beginning and end so prevent wiki from converting it
#: <source>
Then add "first" in Substructure's class
systemctl <start|stop|restart> <arthor|arthorp>
=== Hyperlink to zinc20 ===
</source>
vim .extract/webapps/ROOT/WEB-INF/static/js/index.js
search: '''table_name'''
*find this line "< b>" + d + "< /b>"
*replace with '''"< b><a target='_blank' href='https://zinc20.docking.org/substances/"+d+"'>" + d + "</a></b >"''' //added spaces at the beginning and end so prevent wiki from converting it


=== Make Input Box Work ===
=== ArthorBB, ArthorCC, and ArthorCovalent ===
At the end of the Arthor config file add this:
# ssh to "epyc-a40" server and run
    Resolver=https://sw.docking.org/util/smi2mol?smi=%s
#: <source>
To copy smiles in the input box:
systemctl <start|stop|restart> <arthorbb|arthorcc|arthorcovalent>
    vim .extract/webapps/ROOT/WEB-INF/static/js/index.js
</source>
    search this: “var e=t.src.smiles()”
    add this after the semi-colon
        document.getElementById("ar_text_input").value = e;


== Restarting Instance Instructions ==
There are scripts to easily start and stop Arthor instances via screen.
=== Public Arthor ===
Public Arthor runs on both samekh and nun. SSH in as root then run these commands to stop and start an instance:
#
=== Private Arthor ===
=== Super Private Arthor ===
=== Super Private Arthor ===
# Ssh to machine with respective Arthor instance and become root
# execute '''run_arthors_on_reboot.sh''' to show restart all instances on the machine
#: <source>
bash /root/run_arthors_on_reboot.sh
</source>
# execute '''start_arthor_script.sh''' to restart specific Arthor instance. It will show you options to choose from.
#: <source>
bash /nfs/soft2/arthor_configs/start_arthor_script.sh
</source>

Latest revision as of 22:22, 19 March 2024

Introduction

Here is the link to Arthor's manual

  • Username: ucsf@nextmovesoftware.com
  • Password: <Ask jjiteam@googlegroups.com>

Arthor configurations and the frontend files are consolidated in /nfs/soft2/arthor_configs/.

/nfs/soft2/arthor_configs/start_arthor_script.sh can start/restart Arthor instances on respective machines.

Launch the script to see the options available.

How To Download Arthor

  1. Ssh to nfs-soft2 and become root. Prepare directory
     mkdir /export/soft2/arthor_configs/arthor-<version> && cd /export/soft2/arthor_configs/arthor-<version>
  2. Download Software with this link
    • Username: ucsf@nextmovesoftware.com
    • Password: <Ask jjiteam@googlegroups.com>
  3. Go to releases. Look for smallworld-java-<version>.tar.gz and copy the link address.
  4. Download using wget
     wget --user ucsf@nextmovesoftware.com --password <Ask jjiteam@googlegroups.com> <link address>
  5. Decompress the file
    •  tar -xvf <file_name>

How To Launch Arthor For The First Time

Prepare Files and Directories

  1. Ssh to nfs-exc and become root
  2. Open a port in the firewall
    firewall-cmd --permanent --add-port=<port_number>/tcp 
    firewall-cmd --reload
  3. Go to Arthor Config directory
    cd /export/soft2/arthor_configs/arthor-<latest_version>
  4. Create an Arthor config file
    vim <name_of_file>.cfg
    • Add these lines in the file. Check the manual for more options.
    DataDir=/local2/public_arthor
    MaxConcurrentSearches=6
    MaxThreadsPerSearch=8
    AutomaticIndex=false
    AsyncHitCountMax=20000
    Depiction=./depict/bot/svg?w=%w&h=%h&svgunits=px&smi=%s&zoom=0.8&sma=%m&smalim=1
    Resolver=https://sw.docking.org/util/smi2mol?smi=%s

Start Arthor Instance

  1. Now ssh into a machine you wish to run an Arthor instance on and become root
  2. Change your shell to bash if you havn't already
    bash
  3. Create a screen
    screen -S <screen_name>
  4. Prepare Arthor Config Path
    export ARTHOR_CONFIG="/nfs/soft2/arthor_configs/arthor-<version>/<name_of_config_file>.cfg"
  5. Launch java
    java -jar -Dserver.port=<port_number> /nfs/soft2/arthor_configs/arthor-<version>/arthor-server-<version>.war

Configuration Details

  • DataDir: This is the directory where the Arthor data files live. Location where the index files will be created and loaded from.
  • MaxConcurrentSearches: Controls the maximum number of searches that can be run concurrently by setting the database pool size. When switching between a large number of databases it can be useful to have a larger pool size, the only trade off is keeping file pointers open.
  • MaxThreadsPerSearch: The number of threads to use for both ATDB and ATFP searches
  • Set AutomaticIndex to false if you don't want new smiles files added to the data directory to be indexed automatically
  • AsyncHitCountMax: The upper-bound for the number of hits to retrieve in background searches.
  • Resolver: Using Smallworld API, allows input box to take in a SMILE format and automatically draw on the board.

Check Arthor manual for more configuration options

How to Build Arthor Databases

We can build Arthor Databases anywhere. Consolidate smiles into one directory so you can index them all one by one.

Just use the script located at /nfs/home/jjg/scripts/arthor_index_script.sh at the directory where you stored the smiles.

Here is the content of the script:

#!/bin/bash

target="*.smi"
threads='48'
version="3.6.1"


export ARTHOR_DIR=/nfs/soft2/arthor_configs/arthor-$version/arthor-$version-centos8/
export PATH=$ARTHOR_DIR/bin/:$PATH

for j in $target
do
        echo 'smi2atdb -v -r -j '$threads' -p '$j' '${j}'.atdb |& tee -a '${j}'_log'
        time smi2atdb -v -r -j $threads -p $j ${j}.atdb |& tee -a ${j}_log
	echo 'smi2atfp -j '$threads' -p '$j' '${j}.atfp' |& tee -a '${j}'_log'
        time smi2atfp -j $threads -p $j ${j}.atfp |& tee -a ${j}_log
done

for i in $target*atdb
do
	echo 'atdb2fp -j '$threads' '$i
        time atdb2fp -j $threads $i
	chmod 744 $i.fp
done

Command Details

smi2atdb creates the atdb files needed for Substructure searching.

  • -v verbose
  • -r Compute and store ring size information in the index allowing ring size (3-10) expressions ([r6] and [Z5])
  • -j is the amount of threads to use to index the smiles file
  • -p stores the position of the original file

atdb2fp makes substructure searching faster

smi2atfp creates atfp files for similarity searching

Setting up Round Table

"Round Table allows you to serve and split chemical searches across multiple host machines. The implementation provides a lightweight proxy that forwards requests to other Arthor host servers that do the actual search. Communication is done using the existing Web APIs.

Setting up Host Server

  1. Ssh to nfs-soft2 and become root
  2. Open a port in the firewall
    firewall-cmd --permanent --add-port=<port_number>/tcp 
    firewall-cmd --reload
  3. Go to Arthor Config Directory
    cd /export/soft2/arthor_configs/arthor-<version>
  4. Create Round Table Head configuration file. Here is an example:
  5. [RoundTable]
    RemoteClient=http://10.20.0.41:8008
    RemoteClient=http://10.20.5.19:8008
    Resolver=https://sw.docking.org/util/smi2mol?smi=%s
  6. Now ssh into a machine you wish to run the round table head on and become root
  7. Change your shell to bash if you havn't already
    bash
  8. Create a screen
    screen -S <screen_name>
  9. Prepare Arthor Config Path
    export ARTHOR_CONFIG="/nfs/soft2/arthor_configs/arthor-<version>/<round_table_head>.cfg"
  10. Launch java
    java -jar /nfs/soft2/arthor_configs/arthor-<version>/arthor-<version>-centos7/java/arthor.jar --httpPort=<port_number>

Active Arthor Instances

Public Arthor

Rocky Linux Machine Port Round Table Data Directory Which Arthor
arthor 10.20.200.100:8080 /local3/public_arthor/ Public Arthor

Private Arthor

Rocky Linux Machine Port Round Table Data Directory Which Arthor
arthor 10.20.200.100:8081 /local3/private_arthor/ Private Arthor

Super Private Arthor

CentOS 7 Machine Port Round Table Data Directory Which Arthor
nun 10.20.0.40:8080 Round table head has no directory Super Private Arthor Round Table Head Node
nun 10.20.0.40:8008 /local2/public_arthor/ Super Private Arthor Database Node
samekh 10.20.0.41:8008 /local2/public_arthor/ Super Private Arthor Database Node

Arthor BB and CC

CentOS 7 Machine Port Data Directory Which Arthor
epyc-A40 10.20.200.92:8081 /local2/arthorbb ArthorBB
epyc-A40 10.20.200.92:8082 /local2/arthorcc ArthorCC

Customizing Arthor Frontend To Our Needs (Arthor 3.6.1)

These instructions only worked and compiled for me in the machine called epyc which is running Rocky 8 Linux operating system.

Summary of changes in index.html:

  • Add contact info
  • Advertise TLDR
  • Remove button for Formula
  • Database Information Link

Summary of changes in index.js:

  • Hyperlink the results to zinc20

Summary of changes in sketcher.js:

  • Input box should be updated as user draws molecule

Summary of changes in arthor-swagger.yaml.js:

  • Input box should be updated as user draws molecule


Install Prerequisite Packages

  1. Install Apache Maven
    • dnf install maven -y
  2. Install Node Package Manager (NPM)
    • dnf install npm -y
  3. In your home directory, create a new directory to hold the files for the upcoming procedures
    • mkdir /mnt/nfs/home/jjg/arthor_build_from_source
  4. Download these latest Arthors and store them in 'arthor_build_from_source/'. Here's how to download Arthor.
    • arthor-3.6.1-source.tar.gz
    • arthor-3.6.1-centos7.tar.gz
  5. Extract contents from the tar.gz files
    • tar -xvf arthor-3.6.1-source.tar.gz
      tar -xvf arthor-3.6.1-centos7.tar.gz
  6. Install Apache Maven Arthor dependencies through this script
    • #!/bin/bash
      
      export ARTHOR_DIR=/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-centos8/java
      export OS=linux
      export VERSION=3.6.1
      
      mvn install:install-file -Dfile=$ARTHOR_DIR/arthor-jni-${OS}.jar \
                               -Dpackaging=jar \
                               -DgeneratePom=true \
                               -DartifactId=arthor-jni-${OS} \
                               -DgroupId=com.nextmovesoftware.arthor \
                               -Dversion=$VERSION
      mvn install:install-file -Dfile=$ARTHOR_DIR/arthor-jni.jar \
                               -Dpackaging=jar \
                               -DgeneratePom=true \
                               -DartifactId=arthor-jni \
                               -DgroupId=com.nextmovesoftware.arthor \
                               -Dversion=$VERSION

Customizing Index.html

Location: /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/index.html

Add contact info and tldr

  1. vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/index.html
  2. Search for 'arthor_table_list'
    • ?arthor_table_list
  3. Add contact info, a plug to tldr.docking.org, and database link after the div block where arthor_table_list is inside of. It should look like this
    •       <div class="opt-box-border">
              <label>Databases</label>
              <!-- This will be populated by available databases -->
              <ul id="arthor_table_list">
                <li class="placeholder">Please select a search type</li>
              </ul>
            </div>
            <div class="opt-box-border">
              <label>Ask Questions</label>
              Email us: jjiteam@googlegroups.com
            </div>
            <div class="opt-box-border">
              <label> To Download 100K+ Results</label>
              Sign up for <a href="http://tldr.docking.org/">tldr.docking.org</a> and use arthorbatch
            </div>
            <div class="opt-box-border">
              <label> Database Information</label>
              <a href="https://wiki.docking.org/index.php/Smallworld_and_Arthor_Databases#Smallworld_Databases" target="_blank">Database Information Link</a>
            </div>

Add Database Information Link

Remove Similarity and Formula Buttons

  1. vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/index.html
  2. Search for 'arthor_search_list'
    •  ?arthor_search_list
  3. Delete and Replace the whole 'ul' element block with this
    •           <li value="Similarity" onclick="setSearchType(this)" class="first">
                  Similarity
                </li><li value="Substructure" onclick="setSearchType(this)">
                  Substructure
                </li><li value="SMARTS" onclick="setSearchType(this)" class="last">
                  SMARTS
                </li>
                <!--<li value="Formula" onclick="setSearchType(this)" class="last">
                  Formula
                </li>-->

Customize Index.js

Location /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-source/server-ui/src/index.js

  1. Add the zinc20 hyperlink to the Arthor results. Search for this
    • "<b>" + id + "</b>"
  2. Delete the contents of the whole else block and replace it with this
    •             if (id.substring(0, 6) == "ZINC00") {
                      $info.append(
                        $('<tr>').append(
                          $('<td>').append("<b><a target='_blank' href='https://zinc20.docking.org/substances/"+id+"'>" + id + "</a></b>",
                                           "<span class='table_name'>" + table_name + "</span>")));
                  } else if (id.substring(0,4) == "ZINC" && id.substring(4,6) != "00") {
                      $info.append(
                        $('<tr>').append(
                          $('<td>').append("<b><a target='_blank' href='https://cartblanche22.docking.org/substance/"+id+"'>" + id + "</a></b>",
                                           "<span class='table_name'>" + table_name + "</span>")));
                  } else {
                      $info.append(
                        $('<tr>').append(
                          $('<td>').append("<b>" + id + "</b>")));
                  }

Customize Sketcher.js

Location: /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-source/server-ui/src/sketcher.js

Input Box Updates as User Draws

  1. vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1-source/server-ui/src/sketcher.js
  2. Search for this line "var smiles = event.src.smiles();"
    • ?var smiles = event.src.smiles();
  3. Add this new line below it
    • $('#ar_text_input').val(smiles);

Customize arthor-swagger.yaml

Location: /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/swagger/arthor-swagger.yaml

Change URL Base Path for API Call

  1. vim /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server/src/main/webapp/WEB-INF/static/swagger/arthor-swagger.yaml
  2. Search for "servers"
    • ?basePath
  3. Remove "/arthor" and keep argument empty

Compile/Minify Code through NPM

  1. Install NPM packages and Minify Code
    • cd /nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server-ui
      npm install
      npx webpack-dev-server
      npx webpack --mode=production
  2. If the npx commands don't work, try updating node and npm version to the latest one.
  3. Build the war file
    • cd /nfs/home/jjg/arthor_build_from_source/arthor-3.6.1/arthor-3.6.1-source/server
      mvn install -Pbootable
  4. If it works, then the path to new war file is at /mnt/nfs/home/jjg/arthor_build_from_source/arthor-3.4.7/arthor-3.4.7-source/server/target/arthor-server-3.4.7.war

Adding Arthor to Systemd (example)

  1. Create service files
    touch /etc/systemd/system/arthor.service
  2. Add this code block in the service file
    [Unit]
    Description=Arthor Public Instance
    After=network.target
    
    [Service]
    Type=exec
    Restart=always
    RestartSec=3
    User=root
    ExecStart=/usr/bin/bash /nfs/soft2/arthor_configs/start_arthor_service.sh -public
    ExecStop=/bin/kill -15 $MAINPID
    
    [Install]
    WantedBy=multi-user.target
  3. Change "ExecStart" to other Arthor Instances

Restarting Arthor Instance(s) Instructions

Public and Private Arthor

  1. ssh to "arthor" server and run
    systemctl <start|stop|restart> <arthor|arthorp>

ArthorBB, ArthorCC, and ArthorCovalent

  1. ssh to "epyc-a40" server and run
    systemctl <start|stop|restart> <arthorbb|arthorcc|arthorcovalent>

Super Private Arthor

  1. Ssh to machine with respective Arthor instance and become root
  2. execute run_arthors_on_reboot.sh to show restart all instances on the machine
    bash /root/run_arthors_on_reboot.sh
  3. execute start_arthor_script.sh to restart specific Arthor instance. It will show you options to choose from.
    bash /nfs/soft2/arthor_configs/start_arthor_script.sh