Cluster Narrative

Building a robust cluster for computational pharmacology and computer aided drug discovery is a big deal. This page is part of a series of articles called So you want to set up a lab. Here we describe the overall process, the tradeoffs, and the big picture of what you are doing. We hope you find it useful.

Hardware layout and physical choices

You can just install DOCK on a computer and use it -ignoring a lot of what is written here - there is nothing to stop you. However, no matter how small you start, most labs will want to add new machines to the cluster as soon as funds become available. Adding a few nodes to the cluster can be done manually, but pretty soon things get more complicated. Each machine is subtly different owing to when it was installed, and the amount of work to maintain the cluster rises nearly linearly with the number of computers. Maintenance can quickly become a problem. (The cluster uniformity problem)

Here we propose a cluster architecture that allows maintenance to scale far less than linearly with the number of machines. To do this, we create central services to support the cluster. A somewhat higher startup cost commissioning the cluster nucleus is traded for far lower marginal costs of adding and maintaining machines, and higher cluster uniformity. The cognitive overhead of the sysadmin role is also reduced, almost to a manageable level, or so they say.

The central services are:

• hypervisor - allows you to run many machines as virtual machines on a single piece of hardware. We use libvirt, but vmware and VirtualBox are also known to us and very good.
• provisioning server - we use foreman, which seems to be the industry leader at the moment, but again there are many of these.
• DNS
• 389 for authentication - authentication gets complex fast - it may make sense to use what your colleagues are using.
• sgemaster and sgehead - we love openGE. Again, several versions, all fine, go with the one you know best, if you like it.
• portal / firewall
• NFS server(s)

If you have three to six computers available at low or no cost, you may use them instead of a hypervisor. Foreman allows you to install and format a new machine automatically. DNS allows you to run a private network, which we strongly recommend, and is really essential if you use foreman. 389/authentication is our preferred solution to managing passwords centrally. A portal/firewall is optional, and your setup will depend on your institutional environment. Frankly, nothing is perfect. Think of security as layers. More layers can provide more protection, and can contain the damage if you screw up. NFS servers are a good solution up to at least 1000 cores, which we think covers most of our users. Use only gigabit ethernet, with optional trunking for more throughput.

We recommend you set up the hypervisor first (or your 3-6 core machines). Then, create VM machines for foreman, DNS, 389/authentication, sgemaster and sgehead under the hypervisor. We recommend you use a separate physical machine for the portal. We recommend putting all machines that do not need to be on the public internet on the private network only. If you choose to not use a hypervisor (which is fine) we recommend using a separate physical machine for each core service.

Software choices

Whereas we have tried to reduce dependencies on third party software, some critical dependencies remain and will probably continue to exist for the foreseeable future. Before you start, you need to know that you are going to need this software, which comes with its own licensing terms.

Library preparation:

• OpenEye OEChem
• Omega or cognate
• AMSOL

Docking scripts:

• OEChem

in progress

Back to So you want to set up a lab