How to dock in DOCK3.8
How to dock in DOCK 3.8.0
Differences from DOCK.3.7
DOCK 3.8.0 can be interrupted safely and restarted, which allows more flexibility when submitting docking jobs.
For example, you could set QSUB_ARGS="-l s_rt=00:05:00 -l h_rt=00:07:00" (or SBATCH_ARGS="--time=00:07:00") so that each docking job will only run for 5 minutes before being interrupted. The new subdock.bash script allows submitting the same set of jobs multiple times until they are all complete. A more pragmatic choice might be "-l s_rt=00:28:00 -l h_rt=00:30:00" to get the benefit of faster scheduling on wynton in the short.q. Another advantage is that the job can be interrupted at any time on AWS and it will checkpoint and be restartable.
Running the Script
New subdock scripts are here:
$DOCKBASE/docking/submit/sge/subdock.bash $DOCKBASE/docking/submit/slurm/subdock.bash
subdock.bash requires a number of environmental variables to be passed as arguments.
Required Arguments
INPUT_SOURCE
INPUT_SOURCE should be either:
a) A directory containing one or more db2.tgz files OR
b) A text file containing a list of paths to db2.tgz files
A db2.tgz file should be a tarred + gzipped archive (tar -czf archive.tgz) that contains one or more db2 or db2.gz files.
A job will be launched for each db2.tgz file in INPUT_SOURCE.
EXPORT_DEST
A directory on the NFS where you would like your docking output to end up. If the directory does not exist, the script will try to create it.
DOCKEXEC
An NFS path to a DOCK binary executable (NOT a wrapper script).
IMPORTANT: You should append the executable's compile time stamp to the end of it's name, e.g dock64.20210302. This will avoid any confusion of this executable with other versions of DOCK floating around.
Update 3/19/2021: No longer necessary to do this! Name your dock executable whatever you want, different versions are now distinguished via the computed shasum of the executable. No more effort on your part.
DOCKFILES
An NFS path to the dockfiles (INDOCK, spheres, receptor files, grids, etc.) being used for this docking run. Note that INDOCK is expected to be part of these files. The job script will also recognize tarred dockfiles, e.g with a .tgz or tar.gz extension and handle them appropriately.
The dockfiles directory should be named uniquely, to avoid confusion with other dockfiles other users may be running.
Update 3/19/2021: No longer necessary! dockfiles are now identified via shasum, like the dock executable. Name them whatever you like!
Optional Arguments
SHRTCACHE
The directory DOCK will perform it's work in. Files saved to this directory will be deleted once the docking job has concluded. By default this is /scratch. If /scratch is not available, change this to something else.
LONGCACHE
The directory DOCK will store files that are shared between multiple docking jobs. Files saved to this directory (dockexec and dockfiles) will persist on compute nodes until they are deleted by hand or an automated culling process. By default this directory is /scratch.
SBATCH_ARGS
Additional arguments to provide to slurm's sbatch, if using the slurm version of subdock.bash.
QSUB_ARGS
Additional arguments to provide to sge's qsub, if using the sge version of subdock.bash
Examples
BKS Example
export INPUT_SOURCE=example.in export OUTPUT_DEST=output export DOCKEXEC=$DOCKBASE/docking/DOCK/bin/dock64 export DOCKFILES=dockfiles.example export SHRTCACHE=/dev/shm export LONGCACHE=/tmp export SBATCH_ARGS="--time=02:00:00" $DOCKBASE/docking/submit/slurm/subdock.bash
Wynton Example
export INPUT_SOURCE=example.in export OUTPUT_DEST=output export DOCKEXEC=$DOCKBASE/docking/DOCK/bin/dock64 export DOCKFILES=dockfiles.example export SHRTCACHE=/scratch export LONGCACHE=/scratch export QSUB_ARGS="-l s_rt=00:28:00 -l h_rt=00:30:00" $DOCKBASE/docking/submit/sge/subdock.bash
Example: Running a lot of docking jobs
- see ZINC22:Current status for more info about where ZINC can be found.
- 1. set up sdi files
mkdir sdi export sdi=sdi ls /wynton/group/bks/zinc-22/H19/H19P0??/*.db2.tgz > $sdi/h19p0.in ls /wynton/group/bks/zinc-22/H19/H19P1??/*.db2.tgz > $sdi/h19p1.in ls /wynton/group/bks/zinc-22/H19/H19P2??/*.db2.tgz > $sdi/h19p2.in ls /wynton/group/bks/zinc-22/H19/H19P3??/*.db2.tgz > $sdi/h19p3.in and so on
- 2. set up INDOCK and dockfiles. rename dockfiles to dockfiles.$indockhash. On some nodes, the shasum command is called by sha1sum. Ultimately, renaming the dockfiles to a unique dockfiles is key.
Note: As of 3/19/2021, this is no longer necessary
bash
indockhash=$(cat INDOCK | shasum | awk '{print substr($1, 1, 12)}')
- 3. super script:
export DOCKBASE=/wynton/group/bks/work/jji/DOCK
export DOCKFILES=$WORKDIR/dockfiles.21751f1bb16b
export DOCKEXEC=$DOCKBASE/docking/DOCK/bin/dock64
#export SHRTCACHE=/dev/shm # default
export SHRTCACHE=/scratch
export LONGCACHE=/scratch
export QSUB_ARGS="-l s_rt=00:28:00 -l h_rt=00:30:00 -l mem_free=2G"
for i in sdi/*.in ; do
export k=$(basename $i .in)
echo k $k
export INPUT_SOURCE=$PWD/$i
export EXPORT_DEST=$PWD/output/$k
$DOCKBASE/docking/submit/sge/subdock.bash
done
- 3a. to run for first time
sh super
- 4. how to restart (to make sure complete, iterate until complete)
sh super
- 5. check which output is valid (and broken or incomplete output)
- 6. extract all blazing fast
- 7. extract mol2
more soon, under active development, Jan 28.
Appendix: Docking mono-cations of ZINC22 with DOCK3.8 on Wynton
Added by Ying 3/10/2021
To use: copy and paste the code section into terminal. Note to change the path where labelled with CHANGE this
- set up the folder to run docking.
Path to my example: /wynton/home/shoichetlab/yingyang/work/5HT-5a/10_AL-dock/zinc22_3d_build_3-10-2021
mkdir zinc22_3d_build_3-10-2021 cd zinc22_3d_build_3-10-2021
- copy INDOCK into dockfiles folder, and transfer to the created folder
cp INDOCK dockfiles scp -r INDOCK dockfiles dt2.wynton.ucsf.edu:/path_to_created_folder
- get sdi of monocations of already built ZINC22 (<= H26 heavy atom count)
Modify to your own need...
mkdir sdi
foreach i (`seq 4 1 26`)
set hac = `printf "H%02d" $i `
echo $i $hac
touch sdi/${hac}.sdi
# CHANGE this: to your need
foreach tgz (`ls /wynton/group/bks/zinc-22*/${hac}/${hac}[PM]???/*-O*.db2.tgz`)
ls $tgz
echo $tgz >> sdi/${hac}.sdi
end
end
- rename the dockfiles directory
Note: As of 3/19/2021 this step is no longer necessary
indockhash=$(cat INDOCK | sha1sum | awk '{print substr($1, 1, 12)}')
mv dockfiles dockfiles.${indockhash}
- write and run the super_run.sh
cat <<EOF > super_run.sh
export DOCKBASE=/wynton/group/bks/soft/DOCK-3.8.0.1
export DOCKEXEC=\$DOCKBASE/docking/DOCK/bin/dock64
# CHANGE here: path to the previously renamed dockfiles.\${indockhash}
### Note: as of 3/19/2021 renaming your dockfiles is no longer necessary
export DOCKFILES=/wynton/group/bks/work/yingyang/5HT-5a/10_AL-dock/zinc22_3d_build_3-10-2021/dockfiles.${indockhash}
export SHRTCACHE=/scratch
export LONGCACHE=/scratch
export QSUB_ARGS="-l s_rt=00:28:00 -l h_rt=00:30:00 -l mem_free=2G"
for i in sdi/*.sdi ; do
export k=\$(basename \$i .sdi)
echo k \$k
export INPUT_SOURCE=$PWD/\$i
export EXPORT_DEST=$PWD/output/\$k
\$DOCKBASE/docking/submit/sge/subdock.bash
done
EOF
bash super_run.sh
- keep submitting the super_run script until all db2s have been docked.
After all docking jobs finish, check the output. If no weird error, we can use a while loop to restart.
while true
do
export jobN=$(qstat | grep -c 'rundock')
if [[ $jobN -gt 0 ]]
then
sleep 60
else
bash super_run.sh
fi
done
When no new job is going to be submitted, use Ctrl+c to exit the while loop.
- extract scores from output.
cat << EOF > qsub_extract.csh
#\$ -S /bin/csh
#\$ -cwd
#\$ -pe smp 1
#\$ -l mem_free=100G
#\$ -l scratch=100G
#\$ -l h_rt=50:00:00
#\$ -j yes
#\$ -o extract_all.out
hostname
date
setenv DOCKBASE /wynton/group/bks/soft/DOCK-3.8.0.1
setenv dir_in $PWD
if ! (-d \$TMPDIR ) then
if (-d /scratch ) then
setenv TMPDIR /scratch/\$USER
else
setenv TMPDIR /tmp/\$USER
endif
mkdir -p \$TMPDIR
endif
pushd \$TMPDIR
ls -d \${dir_in}/output/*/*/ > dirlist
python \$DOCKBASE/analysis/extract_all_blazing_fast.py \
dirlist extract_all.txt -30
mv extract_all.* \$dir_in
popd
echo '---job info---'
qstat -j \$JOB_ID
echo '---complete---'
EOF
qsub qsub_extract.csh
Another way is to run the command from the login node (Not recommended since sorting utilizes large memory)
ls -d output/*/*/ > dirlist python $DOCKBASE/analysis/extract_all_blazing_fast.py dirlist extract_all.txt -20
- get poses in parallel
set score_file = $PWD/extract_all.sort.uniq.txt
set score_name = ${score_file:t:r}
set fileprefix = 'tmp_'
set number_per_file = 5000
set workdir = $PWD/${score_name}_poses
mkdir -p $workdir
cd $workdir
split --lines=$number_per_file --suffix-length=4 \
-d $score_file ${fileprefix}
set num = ` ls ${fileprefix}* | wc -l `
echo "Number of score files to process:" $num
cat << EOF > qsub_poses.csh
#\$ -S /bin/csh
#\$ -cwd
#\$ -j yes
#\$ -pe smp 1
#\$ -l mem_free=5G
#\$ -l scratch=20G
#\$ -l h_rt=25:00:00
#\$ -t 1-$num
hostname
date
setenv DOCKBASE /wynton/group/bks/soft/DOCK-3.8.0.1
set list = \` ls \$PWD/${fileprefix}* \`
set MOL = "\${list[\$SGE_TASK_ID]}"
set name = \${MOL:t:r}
python2 $DOCKBASE/analysis/getposes_blazing_faster.py \
"" \${MOL} $number_per_file poses_\${name}.mol2 test.mol2.gz
EOF
qsub qsub_poses.csh
cd ../
- Post-processing...