Generating Decoys (DUDE-Z): Difference between revisions

From DISI
Jump to navigation Jump to search
m (Rstein moved page Blah to Generating Decoys (DUDE-Z))
m (asdf)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
Written by Reed Stein on April 3, 2018.


updated 5/3/2019


updated 8/15/2019


updated 3/6/2020


This pipeline will generate property-matched decoys for a set of ligand SMILES. To build ligands yourself, see "ligand prep" in:
    http://wiki.docking.org/index.php/DOCK_3.7_tutorial_%28Anat%29


All scripts for this tutorial can be found in:
    /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/


Before running any scripts, make sure to source the current version of Python
[[Category:DUDEZ]]
  source /nfs/soft/python/envs/complete/current/env.csh
 
Additionally, JChem needs to be sourced in your ~/.cshrc file with the command:
  source /nfs/soft/jchem/current/env.csh
 
 
== Querying ZINC for Protomers ==
 
This procedure generates decoys for your input ligands by searching through 3D conformers that are already built in ZINC. This procedure is advised if you want decoys to be charge-matched to ligands.
 
=== Step 1) Setting up directories for Protomers ===
 
Before starting, you need a SMILES file with the format (SMILES first, ID second):
  S(Nc1c(O)cc(C(=O)O)cc1)(c2c(scc2)C(=O)O)(=O)=O 116
 
You also need an input file named "decoy_generation.in" with the following lines:
   
    PROTONATE YES
    MWT 0 125
    LOGP 0 3.6
    RB 0 5
    HBA 0 4
    HBD 0 3
    CHARGE 0 2
    LIGAND TC RANGE 0.0 0.35
    MINIMUM DECOYS PER LIGAND 20
    DECOYS PER LIGAND 50
    MAXIMUM TC BETWEEN DECOYS 0.8
    TANIMOTO YES
 
 
If your input ligand SMILES file is already protonated as you want it, set "PROTONATE NO".
 
This file specifies that for each ligand protomer, at least 20 decoys will be retrieved with the following properties:
    - within +/- 125 Daltons
    - within +/- 3.6 logP
    - within +/- 5 rotatable bonds
    - within +/- 4 hydrogen bond acceptors
    - within +/- 3 hydrogen bond donors
    - within +/- 2 charge
    - 0.35 or less Tanimoto
    - minimum 20 decoys per ligand protomer, if available
    - preferred 50 decoys per ligand protomer, if available
    - the maximum TC between decoy molecules should be 0.8
    - "TANIMOTO" refers to whether a Tanimoto calculation should be performed - see step 3 for when this is necessary
 
These are <B>arbitrary</B>, and you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands.
 
Once you have created this file, run the following command to create the decoy generation directory:
 
  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0000_protonate_setup_dirs.py {SMILES_FILE} {NEW_DIR_NAME}
 
Provide a directory name that you want in place of {NEW_DIR_NAME}. This will create the directory with subdirectories named
"ligand_${number}" for each of the ligands in the SMILES file you input.
 
=== Step 2) Retrieving protomer decoys from ZINC15 ===
 
If you have edited the "decoy_generation.in" file which is now located in {NEW_DIR_NAME} as you want, you can run the following command:
 
    python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0001_qsub_generate_decoys.py {NEW_DIR_NAME}
 
This should take 15 minutes to an hour, depending on how many ligands you input.
 
=== Step 3) Assigning accepted protomer decoys to each ligand protomer ===
 
We can assign the property-matched decoys to the ligand protomers. Make sure you have the "decoy_generation_input.in" file from before in {NEW_DIR_NAME}.
 
To filter the decoys, run the following command:
    python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0002_qsub_filter_decoys.py {NEW_DIR_NAME}
 
This will run on the queue. A log file called "FILTER_DECOYS.log" will be generated in {NEW_DIR_NAME} with information and any errors.
 
If you don't get enough decoys, the "decoy_generation.in" file can be modified by changing "MAXIMUM TC BETWEEN DECOYS", "MINIMUM DECOYS PER LIGAND", etc.
To not run the time-consuming Tanimoto calculation between all decoys again, simply add/change this in the "decoy_generation.in" file:
 
    TANIMOTO NO
 
If you set Tanimoto to "NO", make sure that your {NEW_DIR_NAME} still has the original files:
 
    "test_ligdecoy_smiles.smi"
    "cluster_head.list"
 
Otherwise, this step will not run.
 
If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.
 
If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. These files have the format "SMILES", "ZINC ID", "logP", "#Rotatable Bonds", "# Hydrogen Bond Donors", "# Hydrogen Bond Acceptors", "Charge", "Protomer SMILES", and "Tanimoto Coefficient to Ligand".
 
There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.
 
If you still cannot get enough decoys for your ligands, consider reducing the number of ligands you have by clustering, for example, or using the SMILES decoy generation below, which is not limited to only molecules that are already built in ZINC15.
 
=== Step 4) Copying decoy .db2.gz files into your directories ===
 
To copy property-matched decoys into your own directory of choice, run the following command:
 
    python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0003_copy_decoys_to_new_dir.py {NEW_DIR_NAME} {COPY_TO_DIR}
 
where {COPY_TO_DIR} is a new directory that will be created where your decoys will be copied into. In this directory, two subdirectories will be created:
    "ligands" - this includes the input ligands for which there are X number property matched decoys (these are all ligands with "{LIGAND_ID}_final_property_matched_decoys.txt" files in {NEW_DIR_NAME})
    "decoys" - this will include the decoy .db2.gz files for docking and "decoys.smi" which contains all the SMILES strings for property matched decoys
 
IMPORTANT: It is possible that all of your ligand protomers were not matched to property-matched decoys. The "ligands.smi" file in {COPY_TO_DIR} will not include these. Make
sure you do not dock these if you calculate enrichment values.
 
== Querying ZINC for SMILES ==
 
This procedure generates decoys for your input ligand SMILES by finding decoy SMILES in ZINC that are property-matched. This procedure will provide decoy SMILES that you can build yourself into 3D models for docking. If you would like to query ZINC for decoy SMILES so that you can build decoys yourself or if your ligands are >400 Da, start here. If not, go to "Querying ZINC for Protomers" to generate decoys that already have 3D models.
 
=== Step 1) Setting up SMILES directory ===
 
Before starting, you need a SMILES file with the format (SMILES first, ID second):
  S(Nc1c(O)cc(C(=O)O)cc1)(c2c(scc2)C(=O)O)(=O)=O 116
 
You also need an input file named "decoy_generation.in" with the following lines:
 
    SMILES YES
    PROTONATE YES
    MWT 0 125
    LOGP 0 3.6
    RB 0 5
    HBA 0 4
    HBD 0 3
    CHARGE 0 2
    LIGAND TC RANGE 0.0 0.35
    MINIMUM DECOYS PER LIGAND 20
    DECOYS PER LIGAND 50
    MAXIMUM TC BETWEEN DECOYS 0.8
    TANIMOTO YES
    GENERATE DECOYS 750
   
If your input ligand SMILES file is already protonated as you want it, set "PROTONATE NO". "SMILES" tells the function you want to query ZINC for SMILES, not built protomers.
 
This file specifies that for each ligand protomer, {MINIMUM DECOYS PER LIGAND} to {DECOYS PER LIGAND} decoys will be retrieved with the following properties:
    - within +/- 125 Daltons
    - within +/- 3.6 logP
    - within +/- 5 rotatable bonds
    - within +/- 4 hydrogen bond acceptors
    - within +/- 3 hydrogen bond donors
    - within +/- 2 charge
    - 0.35 or less Tanimoto
 
"GENERATE DECOYS" specifies how many potential decoys you want to check for property matching with your ligands. A smaller number results in faster decoy generation, but a smaller pool of potential decoys to compare your ligand against. A larger number results in slower decoy generation, and greater likelihood of property-matched decoys for all your ligands.
 
As with protomers, "MINIMUM DECOYS PER LIGAND" refers to the minimum number of decoys you want for each ligand protomer;
 
"DECOYS PER LIGAND" refers to your preferred number of decoys for each ligand protomer;
 
"MAXIMUM TC BETWEEN DECOYS" refers to the maximum Tc allowed between decoys (the lower, the more dissimilar your decoys will be);
 
and "TANIMOTO" refers to whether the ligand-decoy full Tc matrix should be calculated - this must be done at least once and should not be set to "NO" unless you are re-running step 3.
 
 
These are <B>arbitrary</B>, and you can input your desired minimum and maximum values that decoys can differ by, relative to the ligands. 
 
Once you have created this file, run the following command to create the decoy generation directory:
 
  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0000_protonate_setup_dirs.py {SMILES_FILE} {NEW_DIR_NAME}
 
Provide a directory name that you want in place of {NEW_DIR_NAME}. This will create the directory with subdirectories named
"ligand_${number}" for each of the ligands in the SMILES file you input.
 
=== Step 2) Retrieving SMILES decoys from ZINC15 ===
 
If you have edited the "decoy_generation.in" file which is now located in {NEW_DIR_NAME} as you want, you can run the following command:
 
    python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0001_qsub_generate_decoys.py {NEW_DIR_NAME}
 
Jobs will run for 15 minutes to 1-2 hours depending on how many ligands you input.
 
=== Step 3) Assigning decoys to ligands ===
 
To assign property matched decoys to your ligand protomers, run the following command:
 
    python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0002_qsub_filter_decoys.py {NEW_DIR_NAME}
 
This will run on the queue. As with "Querying ZINC for Protomers":
 
If you don't get enough decoys, the "decoy_generation.in" file can be modified by changing "MAXIMUM TC BETWEEN DECOYS", "MINIMUM DECOYS PER LIGAND", etc.
To not run the time-consuming Tanimoto calculation between all ligands and decoys again, simply add/change this in the "decoy_generation.in" file:
 
    TANIMOTO NO
 
If you set Tanimoto to "NO", make sure that your {NEW_DIR_NAME} still has the original files:
 
    "test_ligdecoy_smiles.smi"
    "cluster_head.list"
 
Otherwise, this step will not run.
 
If these original files still remain, this will skip the Tanimoto calculation step, and filter property matched decoys based on the new parameters in the "decoy_generation.in" file.
 
If this has completed successfully, you should see files in your {NEW_DIR_NAME} with the format "{LIGAND_ID}_final_property_matched_decoys.txt". These files have the format "SMILES", "ZINC ID", "logP", "#Rotatable Bonds", "# Hydrogen Bond Donors", "# Hydrogen Bond Acceptors", "Charge", "Protomer ID", and "Tanimoto Coefficient to Ligand".
 
These files contain the ligands and their properties, as well as property-matched decoys that have been assigned to them. There should also be files with the format "{LIGAND_ID}_replacements.txt", which include extra property-matched decoys that were assigned to that ligand.
 
=== Step 4) Setting up ligand/decoy directories for building SMILES ===
 
If you have queried ZINC for SMILES, you need to build the decoys yourself. To write the SMILES file, run the following command:
 
  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0003b_write_out_ligands_decoys.py {NEW_DIR_NAME} {COPY_TO_DIR}
 
This will create {COPY_TO_DIR} with two subdirectories, "ligands" and "decoys" as well as SMILES files for:
 
    ligands.smi - this includes the input ligands for which there are X number property matched decoys (these are all ligands with "{LIGAND_ID}_final_property_matched_decoys.txt" files in {NEW_DIR_NAME})
    decoys.smi  - this includes the canonicalized property-matched decoy SMILES
    decoy_protomers.smi - this includes the actual property-matched decoy protomer SMILES
 
SMILES for decoys can now be built.
 
For decoy building, use the following command:
 
    setenv DOCKBASE /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk
    source /nfs/soft/dock/versions/dock37/DOCK-3.7-trunk/env.csh
    ${DOCKBASE}/ligand/generate/build_database_ligand.sh -H $ph decoy_protomers.smi <B>--pre-tautomerized</B> --no-db
 
If not all decoys successfully build, more property matched decoys can be taken from the "{LIGAND_ID}_replacements.txt" files. Additionally, you can build decoys without the <B>--pre-tautomerized</B> flag:
 
    ${DOCKBASE}/ligand/generate/build_database_ligand.sh -H $ph <B>decoys.smi</B> --no-db
 
This will produce all protomers of each decoy, including the property-matched decoy protomer.
 
== Visualizing Decoy Properties ==
=== Visualizing property distributions ===
 
To visualize the distributions of molecular properties of matched decoys relative to the ligands, run the following command:
    python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0004_plot_properties.py {NEW_DIR_NAME}
 
There will be 6 images in {NEW_DIR_NAME} for molecular weight, logP, number of rotatable bonds, number of hydrogen bond donors, number of hydrogen bond acceptors, and net charge of ligands and decoys.
 
=== Visualizing decoy Tanimotos to ligands ===
 
To visualize how different the matched decoys are to the input ligands, run the following command:
  python /mnt/nfs/home/rstein/zzz.scripts/new_DUDE_SCRIPTS/0005_plot_tanimoto_to_lig.py {NEW_DIR_NAME}
 
There will be a box and whisker plot image in {NEW_DIR_NAME} showing the Tanimotos calculated between each ligand and all decoys.

Latest revision as of 20:50, 2 May 2024

Retrieved from "http://wiki.docking.org/index.php?title=Generating_Decoys_(DUDE-Z)&oldid=15811"