HP Pro Network Switches

From DISI
Revision as of 22:01, 6 February 2017 by Benrwong (talk | contribs)
Jump to navigation Jump to search

Lab currently uses two HP Pro network switches:
Switch-1-1 is an HP ProCurve J4904A Switch 2848 which is currently in BH101, Rack 3. This switch serves cluster 0 but also serves as a bridge for cluster2 to connect to the N108.
Switch-3-1 is an HP ProCurve J9147A 2910al-48G Switch which is currently in BH101, Rack 0. This switch mainly serves cluster 2.
Since the HP switch models are fairly similar, you will find that most of the below commands and menus will apply to both switches.

Accessing the HP Pro Switches

These two switches are accessed differently.

Switch-1-1 is accessed with telnet from sgehead.bkslab.org:

-bash-3.2$ hostname
sgehead1.c.bkslab.org
-bash-3.2$ telnet switch-1-1
# At the next prompt, you will enter:
Username: admin
Password: <cluster0 formula>

Switch-3-1 is accessed with ssh from sgehead.bkslab.org

-bash-3.2$ ssh root@switch-3-1
-bash-3.2$ hostname
sgehead1.c.bkslab.org
-bash-3.2$ ssh root@switch-3-1
root@switch-3-1's password: <cluster0 formula> 

Switch-3-1 running-config

Running configuration:
; J9147A Configuration Editor; Created on release #W.14.29
hostname "switch-3-1" 
module 1 type J9147A 
interface 1 
  name "vmware1.bkslab.org" 
exit
interface 2 
  name "vmware1.bkslab.org" 
exit 
interface 3 
  name "Link to rack 1 (future)" 
exit
interface 4 
  name "Link to rack 1" 
exit
interface 5 
  name "LACP to nfshead2.bkslab.org" 
exit
interface 6 
  name "LACP to nfshead2.bkslab.org" 
exit
interface 7 
  name "LACP to nfshead3.bkslab.org" 
exit
interface 8 
  name "LACP to nfshead3.bkslab.org" 
exit
interface 9 
  name "LACP to nfshead1.bkslab.org" 
exit
interface 10 
  name "LACP to nfshead1.bkslab.org" 
exit
interface 13 
  name "Public to nfshead6" 
exit
interface 14 
  name "Cluster to nfshead6" 
exit
interface 25 
  name "MSL4048" 
exit
interface 41 
  name "static trunk to QB3 PI Zone" 
exit
interface 42 
  name "static trunk to QB3 PI Zone" 
exit
interface 43 
  name "static trunk to QB3 PI Zone" 
exit
interface 44 
  name "static trunk to QB3 PI Zone" 
exit
interface 45 
  name "LACP trunk to switch-1-1" 
exit
interface 46 
  name "LACP trunk to switch-1-1" 
exit
interface 47 
  name "LACP trunk to switch-1-1" 
exit
interface 48 
  name "LACP trunk to switch-1-1" 
exit
trunk 45-48 Trk1 LACP 
trunk 41-44 Trk2 Trunk 
trunk 6 Trk4 LACP 
vlan 1 
  name "DEFAULT_VLAN" 
  no untagged 1-5,7-40,Trk1-Trk2,Trk4 
  no ip address 
  exit 
vlan 100 
  name "26 subnet" 
  untagged 3-4,8,14,16-24 
  tagged Trk1,Trk4 
  no ip address 
  exit 
vlan 101 
  name "BKS Cluster" 
  untagged 13 
  ip address 10.0.3.10 255.255.0.0 
  tagged Trk1,Trk4 
  exit 
vlan 102 
  name "QB3 PI Zone" 
  untagged Trk2 
  tagged Trk1,Trk4 
  no ip address 
  exit 
vlan 200 
  name "BKS cluster2" 
  untagged 1-2,5,7,9-12,15,25-40 
  ip address 10.20.0.254 255.255.0.0 
  tagged Trk1,Trk4 
  exit 
timesync sntp
sntp unicast
sntp server priority 1 10.0.2.151 3
snmp-server community "public" unrestricted
spanning-tree Trk1 priority 4
spanning-tree Trk2 priority 4
spanning-tree Trk4 priority 4
no autorun
password manager
password operator