Arkeia: Difference between revisions

From DISI
Jump to navigation Jump to search
No edit summary
(Added entirety of Arkeia from Lab Manual Google Doc to wiki page. Tried to categorize to give the wiki page some structure)
Line 10: Line 10:
  du -ch filename | grep total  
  du -ch filename | grep total  


== To create a new savepack ==
== Important Note on Backup Versions ==
In the arkeia web ui, click on What to backup and then Savepacks <br />
The server you are moving to and from must be of the same revision of Arkeia. <br />
Please '''DO NOT''' attempt a move from a different version of Arkeia such as v10.0 to v10.2. <br />
 
If an upgrade of Arkeia is required, first move the configuration to the same version
of Arkeia on the new server. Ensure things are stable for a few days, then upgrade the
new server as needed
 
When moving an Arkeia DiskStorage, the DiskStorage path must be the same location on the new server as it was on the old server.
Using an alternate path requires special steps not covered in this article.
 
The new Arkeia backup server version should be backwards compatible with your
older client versions. So there is no need to upgrade every client to the latest version.
However, every client must be added to the new backup server.
 
== Backup Procedure ==
1) Shutdown all Arkeia processes on the old server
/opt/arkeia/bin/arkboot stop
ps -ef | grep ark
kill PIDs
2) Create a tarball of /opt/arkeia
cd /opt
tar -zcvf arkeia.tar.tz arkeia
3) ftp or scp the "arkeia.tar.tz" file to the new server
scp arkeia.tar.tz root@newserver.domain.com:/opt/
4) Unpackage "arkeia.tar.tz" to /opt/arkeia
cd /opt
tar zxvf arkeia.tar.gz
 
5) Download "arkeia master" and the "arkwui" package from www.arkeia.com/download
 
6) Install the packages on the new server using rpm, dpkg or ./install
rpm -Uvh arkeia master package
rpm -Uvh arkwui
 
OR
 
dpkg -i arkeia master package
dpkg -i arkwui
 
7) If the hostname has changed on the new backup server, then issue the following command to rename everything in Arkeia:
/opt/arkeia/bin/arkmvhost  --host oldserver.domain.com --newhost newserver.domain.com
 
8) Stop Arkeia
/opt/arkeia/bin/arkboot stop
 
9) Change the hostname in the admin.cfg file to the FQDN of the new server
vi /opt/arkeia/arkeiad/admin.cfg
newserver.domain.com
 
10) If you are migrating an Arkeia Disk Storage, the data must also be moved to the new server.
'''NOTE:''' It is important that the DiskStorage is the exact same directory path of the old server.
 
EXAMPLE:
If the old server has the DiskStorage in /vol0/vtl0 then the new server must have the DiskStorage located in /vol/vtl0.
 
11) Edit the usr.lst file to reflect the new hostname for all users
 
vi /opt/arkeia/server/dbase/f3sec/usr.lst
"NODE"  "newserver.domain.com"
 
12) Start Arkeia
 
/opt/arkeia/bin/arkboot start
 
13) Check the Library and Tape Drive paths to and update the settings using the WebUI/
   
IMPORTANT NOTE:
*You will need to stop the Arkeia Library in the WebUI to adjust the settings
 
Arkeia Detection
/opt/arkeia/bin/arkdetect
 
Tape Library in dmesg
dmesg | grep "type 8"
 
Tape Drive(s) in dmesg
dmesg | grep tape
 
13) Start the Arkeia Tape Library and verify the slot inventory is accurate.
 
First determine what files you want to backup  and the size of the directories. 
I’ve found that the following command works the best to determine the directory size.
du -ch filename | grep total
 
= Tapes =
== To see a list of all tapes ==
arkc -tape -list
or save it in a file tape_list:
[root@tav ~]# for TAPE_NAME in `(arkc -tape -list | cut -d'=' -f2)`;do `echo $TAPE_NAME >> /root/tape_list`; done
 
== To add tapes ==
Select Where to backup -> backup to tape -> tapes
BKS-UT-A-100
Arkeia command line
 
 
== How to see which device is the tape library and drives ==
dmesg | grep Attached
 
Attached scsi tape st0 at scsi6, channel 0, id 3, lun0                <---- TAPE DRIVE on st0
Attached scsi tape st1 at scsi6, channel 0, id 4, lun0                          <---- TAPE DRIVE on st1
Attached scsi generic sg1 at scsi6, channel 0, id 3, lun 1,  type 8              <---- TAPE LIBRARY on sg1
 
OR
 
Tape Library
 
type 8 devices are library robotics and control arms.
dmesg |  grep "type 8"
sg 6:0:1:0: Attached scsi generic sg1 type 8
 
== To see the details of the tape library ==
/usr/sbin/mtx -f /dev/sg1 status
/usr/sbin/mtx -f /dev/sg1 inventory
 
== How to Reindex Tapes (Unknown Tape) ==
*Note: When you reindex a tape there cannot be any other arkeia jobs happening (ie no other backup jobs, restore jobs, etc).
 
Insert the tape you want to reindex into the tape library.
Log into https://tav.ucsf.bkslab.org:20618
Go to Backup -> Where to backup -> TapeStorage -> Tape Libraries
Then in the drop down menu under Actions select Manage Drives and Slots
Then click the Move Tape tab
Then on the right hand side select the tape you want to reindex and on the left select a Tape Drive (usually just Tape Drive 1) and then click the left directional button. (Take note of the slot number the tape is in).
Once this is done go to Tools -> Tape reindex
Unclick the Reindex a known tape box. Enter the Source drive, Pool to attach, Source tape type and the Tape slot num and click Start Reindex. 
Then when it’s done go to tapes, select the slot on the left and the name of the tape on the right and then click the left arrow (you have to scroll down to see it).
 
I don’t know about the following:
Once this is done, ssh to tav and as root do the following:
cat /opt/arkeia/server/dbase/f3tape/tpmaster.lst | more and look for the tape you just created/reindexed.
Then vi /opt/arkeia/server/dbase/f3tape/oldcid.lst and delete the entire entry for that tape.  There should be something like:
ITEM {
"CID" "43cf5073"
}
You would delete all three lines.
 
Then go back to the web ui and go to Tools-> Tape Reindex again and leave the Reindex a known tape box checked, enter in the Source tape and the Source drive and click Start Reindex.  Once this is finished (it will probably take a while) you can then restore the files by going to Restore.
 
== If arklib is not running when you start the tape library ==
On the server:
cd /opt/arkeia/bin
./arklib
 
== How to Overwrite a Tape Label in Arkeia ==
First, if the tape that you’re overwriting already exists, delete it.
Then move the tape (it should say unknown tape or something) to the tape drive.
Pretend that the device name for the tape drive is /dev/st0 and there exists a file on the backup server /home/backup/testing
tar -cvf /dev/st0 /home/backup/testing
 
= To create a new savepack =
In the Arkeia web UI, click on What to backup and then Savepacks <br />
On the right hand side of the screen, click on add a new savepack. <br />
On the right hand side of the screen, click on add a new savepack. <br />
Enter a savepack name <br />
Enter a savepack name <br />
Line 50: Line 204:
</pre>
</pre>


== To add tapes ==
Select Where to backup -> backup to tape -> tapes
BKS-UT-A-100
Arkeia command line


= Licenses =
== Different Types of Licenses ==
THE DIFFERENT TYPES OF LICENSES:
Arkeia classifies clients using three Type categories.
The following ONLY applies to clients/ backup server
Type 1
AIX, Solaris, True64, IRIX, HP-UX, SCO OpenServer / Unixware, Novell Netware
Type 2
Windows Servers (2000, 2003, 2008, 2012)
Windows Server and Advanced
MacOS X Server
SLES
RHAS
RHEL
Mandriva Corporate Server
NOTE: Any Linux on IA64, PowerPC, x86_64 architecture
Type 3
Free Linux on x_86, (Gentoo, CentOS, Fedora, SuSE)
Windows Workstations, Professional and Home Editions (XP, Vista)
MacOS X Workstations , Free BSD, Open BSD, NetBSD
== Our Licenses ==
Here are all licenses for Account UCSF_PHARMA
License customer:    UCSF_PHARMA
License name:    ARK102
License serial:    TE92R1ZFRHMDPN
License checksum:    M59D5SAWVYN8XA
Comment:    Arkeia 10.2
Creation date:    2014-05-13 20:46:56
License created by:    sbrown
Expire time:    Never
Type-1 agents:    0
Type-2 agents:    4
Type-3 agents:    8
Number flows:    11
Number drives:    1
Compression:    Yes
Encryption:    No
Multiflow:    Yes
Periodic backup:    Yes
Archive:    Yes
License customer:    UCSF_PHARMA
License name:    TAPE_AUTOMATION
License serial:    TE91GNVGRHLDP1
License checksum:    S99ZJRKW43VVYK
Comment:    Tape Automation
Creation date:    2009-08-18 21:06:05
License created by:    bspagnuolo
Expire time:    Never
Number:    1
License customer:    UCSF_PHARMA
License name:    ARKADD_FLOW
License serial:    TE91GNVTRHLDP1
License checksum:    9ADJYG7PF4LT78
Comment:    Add Flows
Creation date:    2009-04-09 18:18:54
License created by:    jscheldt
Expire time:    Never
Number:    11
License customer:    UCSF_PHARMA
License name:    ARKADD_DRIVE
License serial:    TE91GNVGRHLDP1
License checksum:    JXS6B46BENNC9Z
Comment:    Add Drives
Creation date:    2009-08-21 17:01:38
License created by:    bspagnuolo
Expire time:    Never
Number:    1
License customer:    UCSF_PHARMA
License name:    ARKADD_CLI3
License serial:    TE91GNVTRHLDP1
License checksum:    XMWWFR9YHZSNCW
Comment:    Add Clients type 3 (Arkeia >= 5.2)
Creation date:    2009-04-09 18:18:13
License created by:    jscheldt
Expire time:    Never
Number:    11
License customer:    UCSF_PHARMA_a
License name:    ARKADD_CLI3
License serial:    TE91GNVHRHLDP1
License checksum:    72JA45ACJD93VA
Comment:    Add Clients type 3 (Arkeia >= 5.2)
Creation date:    2010-03-11 02:08:30
License created by:    hbrackett
Expire time:    Never
Number:    2


== To list licenses ==
== To list licenses ==
  /opt/arkeia/bin/arkchklic
  /opt/arkeia/bin/arkchklic
To remove a client (remove a machine from being backed up):
 
= To remove a client (remove a machine from being backed up) =
  /opt/arkeia/bin/arkrmhost hostname
  /opt/arkeia/bin/arkrmhost hostname
== PROBLEM:  The web UI freezes when trying to start a backup==




=PROBLEM:  The web UI freezes when trying to start a backup=


"Hello,
"Hello,
Line 161: Line 411:
* Clients that are (unknown Type 1) are no longer registered to the backup server.
* Clients that are (unknown Type 1) are no longer registered to the backup server.
These clients must be re-registered or deleted
These clients must be re-registered or deleted
= To see what ports Arkeia is running on =
netstat -pant | grep ark
= To Check and See Which Drive is Okay to Use =
On the server type:
mt -f /devst0 status
and
mt -f /dev/st1 status
Whichever one responds with BOT ONLINE IM_REP_EN
is the device the drive should be set to.





Revision as of 21:34, 27 June 2016

Arkeia/Backups

Arkeia is the software currently being used to control all aspects of tape backups/restorations/archives. The web interface for Arkeia is: (see google docs) Arkeia also has a command line interface, which is described after how to use the web interface section.

How to set up a brand new backup

First determine what files you want to backup and the size of the directories.
I’ve found that the following command works the best to determine the directory size.

du -ch filename | grep total 

Important Note on Backup Versions

The server you are moving to and from must be of the same revision of Arkeia.
Please DO NOT attempt a move from a different version of Arkeia such as v10.0 to v10.2.

If an upgrade of Arkeia is required, first move the configuration to the same version of Arkeia on the new server. Ensure things are stable for a few days, then upgrade the new server as needed

When moving an Arkeia DiskStorage, the DiskStorage path must be the same location on the new server as it was on the old server. Using an alternate path requires special steps not covered in this article.

The new Arkeia backup server version should be backwards compatible with your older client versions. So there is no need to upgrade every client to the latest version. However, every client must be added to the new backup server.

Backup Procedure

1) Shutdown all Arkeia processes on the old server

/opt/arkeia/bin/arkboot stop
ps -ef | grep ark
kill PIDs

2) Create a tarball of /opt/arkeia

cd /opt
tar -zcvf arkeia.tar.tz arkeia

3) ftp or scp the "arkeia.tar.tz" file to the new server

scp arkeia.tar.tz root@newserver.domain.com:/opt/

4) Unpackage "arkeia.tar.tz" to /opt/arkeia

cd /opt
tar zxvf arkeia.tar.gz

5) Download "arkeia master" and the "arkwui" package from www.arkeia.com/download

6) Install the packages on the new server using rpm, dpkg or ./install

rpm -Uvh arkeia master package
rpm -Uvh arkwui

OR

dpkg -i arkeia master package
dpkg -i arkwui

7) If the hostname has changed on the new backup server, then issue the following command to rename everything in Arkeia:

/opt/arkeia/bin/arkmvhost  --host oldserver.domain.com --newhost newserver.domain.com

8) Stop Arkeia

/opt/arkeia/bin/arkboot stop

9) Change the hostname in the admin.cfg file to the FQDN of the new server

vi /opt/arkeia/arkeiad/admin.cfg
newserver.domain.com

10) If you are migrating an Arkeia Disk Storage, the data must also be moved to the new server.

NOTE: It is important that the DiskStorage is the exact same directory path of the old server.

EXAMPLE: If the old server has the DiskStorage in /vol0/vtl0 then the new server must have the DiskStorage located in /vol/vtl0.

11) Edit the usr.lst file to reflect the new hostname for all users

vi /opt/arkeia/server/dbase/f3sec/usr.lst
"NODE"  "newserver.domain.com"

12) Start Arkeia

/opt/arkeia/bin/arkboot start

13) Check the Library and Tape Drive paths to and update the settings using the WebUI/

IMPORTANT NOTE:

  • You will need to stop the Arkeia Library in the WebUI to adjust the settings

Arkeia Detection

/opt/arkeia/bin/arkdetect

Tape Library in dmesg

dmesg | grep "type 8"

Tape Drive(s) in dmesg

dmesg | grep tape

13) Start the Arkeia Tape Library and verify the slot inventory is accurate.

First determine what files you want to backup and the size of the directories. I’ve found that the following command works the best to determine the directory size.

du -ch filename | grep total

Tapes

To see a list of all tapes

arkc -tape -list

or save it in a file tape_list:

[root@tav ~]# for TAPE_NAME in `(arkc -tape -list | cut -d'=' -f2)`;do `echo $TAPE_NAME >> /root/tape_list`; done

To add tapes

Select Where to backup -> backup to tape -> tapes BKS-UT-A-100 Arkeia command line


How to see which device is the tape library and drives

dmesg | grep Attached

Attached scsi tape st0 at scsi6, channel 0, id 3, lun0 <---- TAPE DRIVE on st0 Attached scsi tape st1 at scsi6, channel 0, id 4, lun0 <---- TAPE DRIVE on st1 Attached scsi generic sg1 at scsi6, channel 0, id 3, lun 1, type 8 <---- TAPE LIBRARY on sg1

OR

Tape Library

type 8 devices are library robotics and control arms.

dmesg |  grep "type 8"

sg 6:0:1:0: Attached scsi generic sg1 type 8

To see the details of the tape library

/usr/sbin/mtx -f /dev/sg1 status /usr/sbin/mtx -f /dev/sg1 inventory

How to Reindex Tapes (Unknown Tape)

  • Note: When you reindex a tape there cannot be any other arkeia jobs happening (ie no other backup jobs, restore jobs, etc).

Insert the tape you want to reindex into the tape library.

Log into https://tav.ucsf.bkslab.org:20618

Go to Backup -> Where to backup -> TapeStorage -> Tape Libraries Then in the drop down menu under Actions select Manage Drives and Slots Then click the Move Tape tab Then on the right hand side select the tape you want to reindex and on the left select a Tape Drive (usually just Tape Drive 1) and then click the left directional button. (Take note of the slot number the tape is in). Once this is done go to Tools -> Tape reindex Unclick the Reindex a known tape box. Enter the Source drive, Pool to attach, Source tape type and the Tape slot num and click Start Reindex. Then when it’s done go to tapes, select the slot on the left and the name of the tape on the right and then click the left arrow (you have to scroll down to see it).

I don’t know about the following: Once this is done, ssh to tav and as root do the following: cat /opt/arkeia/server/dbase/f3tape/tpmaster.lst | more and look for the tape you just created/reindexed. Then vi /opt/arkeia/server/dbase/f3tape/oldcid.lst and delete the entire entry for that tape. There should be something like: ITEM { "CID" "43cf5073" } You would delete all three lines.

Then go back to the web ui and go to Tools-> Tape Reindex again and leave the Reindex a known tape box checked, enter in the Source tape and the Source drive and click Start Reindex. Once this is finished (it will probably take a while) you can then restore the files by going to Restore.

If arklib is not running when you start the tape library

On the server:

cd /opt/arkeia/bin
./arklib

How to Overwrite a Tape Label in Arkeia

First, if the tape that you’re overwriting already exists, delete it. Then move the tape (it should say unknown tape or something) to the tape drive. Pretend that the device name for the tape drive is /dev/st0 and there exists a file on the backup server /home/backup/testing

tar -cvf /dev/st0 /home/backup/testing

To create a new savepack

In the Arkeia web UI, click on What to backup and then Savepacks
On the right hand side of the screen, click on add a new savepack.
Enter a savepack name
The compression type should be LZ1 or LZ3_3
Encryption type allowed should be no encryption
Filesystems allowed normal filesystems
Hit the create button

You will then be redirected to the list of savepacks.
With the new created savepack highlighted, click on List of Trees tab.
Then click on Manage trees for your_savepack on the righthand side.
Then click on Add a new tree on the righthand side.
If the server is nfsheadN and the directory you want to backup is /raidM/people, you would enter the pathname like this:
nfsheadN.bkslab.org!file:/raidM/people
Then at the bottom click Add tree

Trees in Toronto

(replace domain with actual domain)

fawlty.domainr!file:/srv/nfs/work
fawlty.domain!file:/srv/nfs/db
fawlty.domain!file:/srv/nfs/store
fawlty.domain!file:/srv/nfs/bin
towers.domain!file:/srv/nfs/home
towers.domain!file:/srv/nfs/software
spinaltap.domain!file:/srv
suspects.domain!file:/var/lib/dirsrv
suspects.domain!file:/etc/dirsrv
suspects.domain!file:/etc/pki
marley.donnelly.domain!file:/home
yes.donnelly.domain!file:/home
primus.donnelly.domain!file:/home
clash.donnelly.domain!file:/home
rancid.donnelly.domain!file:/home
rocky.domain!file:/var/lib/libvirt
apes.domain!file:/var/lib/libvirt
runaway.domain!file:/domains


Licenses

Different Types of Licenses

THE DIFFERENT TYPES OF LICENSES:

Arkeia classifies clients using three Type categories. The following ONLY applies to clients/ backup server

Type 1

AIX, Solaris, True64, IRIX, HP-UX, SCO OpenServer / Unixware, Novell Netware

Type 2

Windows Servers (2000, 2003, 2008, 2012) Windows Server and Advanced MacOS X Server SLES RHAS RHEL Mandriva Corporate Server NOTE: Any Linux on IA64, PowerPC, x86_64 architecture

Type 3

Free Linux on x_86, (Gentoo, CentOS, Fedora, SuSE) Windows Workstations, Professional and Home Editions (XP, Vista) MacOS X Workstations , Free BSD, Open BSD, NetBSD

Our Licenses

Here are all licenses for Account UCSF_PHARMA
License customer:     UCSF_PHARMA
License name:     ARK102
License serial:     TE92R1ZFRHMDPN
License checksum:     M59D5SAWVYN8XA
Comment:     Arkeia 10.2
Creation date:     2014-05-13 20:46:56
License created by:     sbrown
Expire time:     Never
Type-1 agents:     0
Type-2 agents:     4
Type-3 agents:     8
Number flows:     11
Number drives:     1
Compression:     Yes
Encryption:     No
Multiflow:     Yes
Periodic backup:     Yes
Archive:     Yes


License customer:     UCSF_PHARMA
License name:     TAPE_AUTOMATION
License serial:     TE91GNVGRHLDP1
License checksum:     S99ZJRKW43VVYK
Comment:     Tape Automation
Creation date:     2009-08-18 21:06:05
License created by:     bspagnuolo
Expire time:     Never
Number:     1
License customer:     UCSF_PHARMA
License name:     ARKADD_FLOW
License serial:     TE91GNVTRHLDP1
License checksum:     9ADJYG7PF4LT78
Comment:     Add Flows
Creation date:     2009-04-09 18:18:54
License created by:     jscheldt
Expire time:     Never
Number:     11
License customer:     UCSF_PHARMA
License name:     ARKADD_DRIVE
License serial:     TE91GNVGRHLDP1
License checksum:     JXS6B46BENNC9Z
Comment:     Add Drives
Creation date:     2009-08-21 17:01:38
License created by:     bspagnuolo
Expire time:     Never
Number:     1
License customer:     UCSF_PHARMA
License name:     ARKADD_CLI3
License serial:     TE91GNVTRHLDP1
License checksum:     XMWWFR9YHZSNCW
Comment:     Add Clients type 3 (Arkeia >= 5.2)
Creation date:     2009-04-09 18:18:13
License created by:     jscheldt
Expire time:     Never
Number:     11
License customer:     UCSF_PHARMA_a
License name:     ARKADD_CLI3
License serial:     TE91GNVHRHLDP1
License checksum:     72JA45ACJD93VA
Comment:     Add Clients type 3 (Arkeia >= 5.2)
Creation date:     2010-03-11 02:08:30
License created by:     hbrackett
Expire time:     Never
Number:     2

To list licenses

/opt/arkeia/bin/arkchklic

To remove a client (remove a machine from being backed up)

/opt/arkeia/bin/arkrmhost hostname


PROBLEM: The web UI freezes when trying to start a backup

"Hello,

SUMMARY:

The backup is failing due to a hostname change on the backup server itself.

DETAILS:

1) uname -a reports the real $HOSTNAME

backup.uoft.bkslab.org

2) However, the name that was present when Arkeia was installed was "backup.bkslab.org"

2014/01/14 14:32:33 E19010060 arkvlib (19004) get_hostlist [L799]: Error: the host backup.bkslab.org is not server
2014/01/14 14:32:33 E19010090 arkvlib (19004) get_hostlist [L204]: Bad end
2014/01/14 14:32:33 E19010060 arkvlib (19004) get_hostlist [L799]: Error: the host backup.bkslab.org is not server
2014/01/14 14:32:33 E19010090 arkvlib (19004) get_hostlist [L204]: Bad end

SOLUTION:

1) Stop Arkeia

/opt/arkeia/bin/arkboot stop

2) The /etc/host file looks OK

142.150.250.19 backup.pharmacy.uoft.bkslab.org backup.uoft.bkslab.org

3) Delete the existing entry in the admin.cfg file and replace it with the current $HOSTNAME

vi /opt/arkeia/arkeiad/admin.cfg backup.uoft.bkslab.org

4) Manually edit the rhost.lst file and delete the backup servers corrupted entry located at the bottom of the file

vi /opt/arkeia/arkeiad/rhost.lst

ITEM { "OLDNAME" "backup.bkslab.org" "IS_MEDIA_SERVER" "1" ";" "INETADDR\"\"" "169.230.26.116" "INETADDR" "142.150.250.19" "INETNUM" "335189646" "DISTRIBNAME" "Red Hat CentOS release 5.4 (Final)" "OSNAME" "Linux 2.6.18-164.11.1.el5 x86_64" "VERSION" "Arkeia Network Backup 8.2.9" "NUMPOINTS" "997" "ID" "N" "ISDIR" "h" "PORT" "617" "NOM" }

5) Issue the arkmvhost name command to rename Arkeia

/opt/arkeia/bin/arkmvhost --host backup.bkslab.org --newhost backup.uoft.bkslab.org

6) Start Arkeia (will create a new entry in the rhost.lst file at the top of the file)

/opt/arkeia/bin/arkboot start

7) Verify the library slots inventory has completed and the issue should be corrected.

Regards, S B


Hello,

> If I add trees or rename trees, do I need to register them somewhere?

All trees in the Arkeia Savepack must have a registered client machine on the backup server. Failure to backup a client that is not registered will result in a Type 1 client license error.

> If so, how and where?

Please see the "Adding Client Section" at this URL to properly add/register clients to the backup server. http://wiki.arkeia.com/mediawiki/index.php/Arkeia_Network_Backup_Documentation

> Adding or renaming trees doesn't affect the # of licenses, does it?

Only if you add a hostname to the Savepack that is not registered to the backup server or exceeds the license limit.

S B

If I add trees or rename trees, do I need to register them somewhere? If so, how and where? Adding or renaming trees doesn't affect the # of licenses, does it?

Hello,

You can run the command /opt/arkeia/bin/arkchklic too see how many licenses and what type are allowed on the backup server and which hostnames are claiming and in violation of the license.

  • Clients and their indexes can removed using the /opt/arkeia/bin/arkrmost command.
  • Clients that are (unknown Type 1) are no longer registered to the backup server.

These clients must be re-registered or deleted

To see what ports Arkeia is running on

netstat -pant | grep ark

To Check and See Which Drive is Okay to Use

On the server type:

mt -f /devst0 status 

and

mt -f /dev/st1 status

Whichever one responds with BOT ONLINE IM_REP_EN is the device the drive should be set to.


External References

http://wiki.arkeia.com/index.php/WD_Arkeia_Version_10.1_Linux_Installation_Guide

http://wiki.arkeia.com/index.php/Network_Backup_Version_8.1_Tape_Library_Guide#Tape_Library_Details

http://wiki.arkeia.com/index.php/Arkeia_Network_Backup_Version_10.0_Quick_Start_Guide_-_English#Attach_the_Tape_Drive