Format And Mount local2

From DISI
Jump to navigation Jump to search

Format Disk

Do these commands as root:

  • fdisk -l
    • Find disks/RAID disks to format
  • parted
  • print
  • mklabel gpt
  • mkpart logical 0GB 9995GB. (based on what we read in result of print above)
  • print. (to confirm)
  • quit

Mount storage disks using LVM

Reference guide: https://www.thegeekdiary.com/redhat-centos-a-beginners-guide-to-lvm-logical-volume-manager/

1. Scan devices to be used as physical volumes (PV)

lvmdiskscan

2. Initialize the block devices

pvcreate <drive1> <drive2> <...> ...
example: pvcreate /dev/sdb /dev/sdc /dev/sdd

3. To double check PV

pvdisplay
pvscan
pvs

4. After PV, create a Volume Group (VG)

vgcreate <name of volume> <drive1> <drive2> <...> ...
example: vgcreate soft2 /dev/sdb /dev/sdc /dev/sdd

5. To double check VG

vgs <VG name>
vgdisplay <VG name>

6. After VG, create a Logical Volume (LV)

lvcreate <options> <name of LV> <VG Name>
example: lvcreate -l 100%FREE -n soft_lv soft2 
"-l" is for storage space in percent, 100%FREE means use all space in VG
"-n" is for name of LV

7. Double Check LV

lvs /dev/<VG NAME>/<LV NAME>
lvdisplay /dev/<VG NAME>/<LV NAME>
lvscan

8. Create a File System

mkfs.ext4 <options> /dev/<VG NAME>/<LV NAME>
example: mkfs.ext4 /dev/soft2/soft_lv

9. Make the directory:

mkdir <somewhere>
example: mkdir /export/soft2

10. Mount permanently:

vim /etc/fstab
/dev/<VG NAME>/<LV NAME>      <somewhere>       <type of file system>      <mount options>      <dump>         <fsck>
example:
/dev/soft2/soft_lv	/export/soft2	ext4	defaults	1	2

11. Lastly, mount all

mount -a

RAID1 with LVM on fresh drives

1. Check which disk will act as the mirror

fdisk -l

2. Create physical volumes of the drives

pvcreate <disk> <disk> <disk>
example: pvcreate /dev/sdz /dev/sdaa

3. Create a volume group for these drives

vgcreate <name> <disk1> <disk2>
example: vgcreate local2 /dev/sdz /dev/sdaa

4. Create a logical volume with "-m1" flag to say mirror/raid1

lvcreate -l <how much of disk to use in percent> -m1 -n <name> <volume_group>
example: lvcreate -l 100%FREE -m1 -n local2_lv local2

5. Mount permanently:

vim /etc/fstab
/dev/<VG NAME>/<LV NAME>      <somewhere>       <type of file system>      <mount options>      <dump>         <fsck>
example:
/dev/local2/local2_lv   /local2         ext4    defaults        1       2

6. Lastly, mount all

mount -a

RAID1 with LVM on an existing used logical volume

Before starting, make sure that the disk that will mirror data is the same size or bigger than the drive being mirrored.

1. Check if the volume has free space for lvm logs. Mirror will fail if no free space available.

pvscan
example output:
 PV /dev/sda2   VG centos          lvm2 [<222.57 GiB / 0    free]
 PV /dev/sdb1   VG centos          lvm2 [<223.57 GiB / 0    free]
 PV /dev/sdd1   VG local2          lvm2 [<7.28 TiB / <5.03 GiB free]

If PV /dev/sdd1 VG local2 lvm2 [<7.28 TiB / 0 free] then do

lvreduce -l -1 --resizefs /dev/<volume_group>/<logical_volume>
example : lvreduce -l -1 --resizefs /dev/local2/zinc_lv


2. Check which disk will act as the mirror

fdisk -l


3. Extend the disk to volume group

vgextend <volume_group> /dev/<disk>
example: vgextend local2 /dev/sdc

To remove extension:

vgreduce <volume_group> /dev/<disk>
example: vgreduce local2 /dev/sdc


4. Convert current working logical volume to RAID1 and assign mirror

lvconvert -m1 /dev/<volume_group>/<logical_volume> /dev/<disk>
example: lvconvert -m1 /dev/local2/zinc_lv /dev/sdc

5. It should say it was successful, to check syncing progress

lvs -a -o +devices